Centrifugal Pump, Phase Three, Pump Housing Material Cast Iron, Horsepower 1 hp, Nameplate Voltage 230/460V AC, Compatible Intake Pipe Size 1 1/4 in, Intake Type NPT, Compatible Discharge Pipe Size 1 in, Discharge Type NPT, Motor Enclosure Open Dripproof
| HP - Pumps | 1 hp |
|---|---|
| Voltage - Pumps | 230V AC, 460V AC |
| Phase - Pumps | 3 |
| Housing Material - Pumps | Cast Iron |
| Inlet Size - Pumps | 1-1/4 in NPT |
| Outlet Size - Pumps | 1 in NPT |
| Max. Head | 100 ft |
| Max. Pressure - Pumps | 43 psi |
| Motor Enclosure - Pumps | Open Dripproof |
| Motor Enclosure | Open Drip Proof |
| Max. GPM @ Head | 59 @ 10 ft |
| Item | Straight Centrifugal Pump |
| Item - Straight Centrifugal Pumps | Straight Centrifugal High Head Pump |
| Phase | Three |
| Shut Off Pressure (Maximum) | 43 psi |
| Discharge Type | NPT |
| Pump Housing Material | Cast Iron |
| Compatible Discharge Pipe Size | 1 in |
| Nameplate Voltage | 230/460V AC |
| Intake Type | NPT |
| Horsepower | 1 |
| Compatible Intake Pipe Size | 1-1/4 in |
| Duty Cycle | Continuous |
| Impeller Diameter | 4-31/32 in |
| Suction Lift - Maximum | Not Applicable |
| Flow Rate @ 220 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 10 ft of Head - Maximum | 59 gpm |
| Flow Rate @ 200 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 30 ft of Head (Maximum) | 51 gpm |
| Discharge Position | Center |
| Flow Rate (Maximum) | 59 gpm |
| Inlet Diameter | 1-1/4 in |
| Media Temperature - Maximum | 200 deg F |
| Volute Material | Cast Iron |
| Best Efficiency Head | 70 ft |
| Shaft Seal Type | Mechanical |
| Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 25 ft of Head (Maximum) | Not Applicable |
| Ambient Temperature - Maximum | 40 deg C |
| Flow Rate @ 140 ft of Head (Maximum) | Not Applicable |
| Best Efficiency Flow | 34 gpm |
| Chemical Compatibility | Non-Flammable Liquids |
| Flow Rate @ 280 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 300 ft of Head (Maximum) | Not Applicable |
| Service Factor | 1.4 |
| Flow Rate @ 40 ft of Head (Maximum) | 47 gpm |
| Pumping Application | Booster Services, Irrigation, Jockey Pump Services, Spraying Systems, Water Circulation |
| Shaft Material | Stainless Steel |
| Manufacturer Warranty Length | 1 yr |
| Motor Design | Three-Phase |
| For Use With Potable Systems | No |
| Motor Frame Size | 56J |
| Discharge Rotation Increments | 0 deg |
| Discharge Orientation | Top |
| Viscosity (Maximum) | 100 SUS |
| Hazardous Location Class | Not Rated |
| Number of Stages | 1 |
| Overall Length | 15-1/2 in |
| Standards | UL Recognized Motor |
| Flow Rate @ 90 ft of Head (Maximum) | 16 gpm |
| Case Pressure - Maximum | 100 psi |
| Inlet Orientation | Side |
| Ambient Temperature - Minimum | Not Applicable |
| Overall Height | 8-1/2 in |
| Mounting Orientation | Horizontal |
| Impeller Material | Bronze |
| Shaft Seal Material | FKM, Carbon, Ceramic |
| Flow Rate @ 160 ft of Head (Maximum) | Not Applicable |
| Overall Width | 7.8 in |
| Flow Rate @ 100 ft of Head (Maximum) | Not Applicable |
| Shaft Outer Diameter | 5/8 in |
| Flow Rate @ 240 ft of Head (Maximum) | Not Applicable |
| Temperature Code | Not Applicable |
| Flow Rate (Minimum) | 16 gpm |
| Flow Rate @ 260 ft of Head (Maximum) | Not Applicable |
| Specific Gravity (Maximum) | 1 |
| Frequency | 60 Hz |
| Media Temperature - Minimum | 40 deg F |
| Cord Length | Not Applicable |
| Electrical Connection Type | Hardwired |
| Solid Diameter (Maximum) | 0.13 in |
| Series | Not Applicable |
| Thermal Overload Protection | Yes |
| Flow Rate @ 180 ft of Head (Maximum) | Not Applicable |
| Feet of Head (Maximum) | 98 ft |
| Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
| Includes | Manual |
| Drive Coupling Type | No Coupling |
| Discharge Diameter | 1 in |
| Flow Rate @ 15 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 70 ft of Head (Maximum) | 34 gpm |
| Flow Rate @ 60 ft of Head (Maximum) | Not Applicable |
| Inlet Position | Center |
| Priming | Manual |
| Motor Speed - Maximum | 3,450 rpm |
| Bearing Type | Ball |
| Features | Not Applicable |
| Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 20 ft of Head (Maximum) | 55 gpm |
| Shut Off Pressure - Maximum | 43 psi |
| Flow Rate @ 50 ft of Head (Maximum) | 43 gpm |
| Wetted Material | Ceramic, Carbon, Viton, Cast Iron, Bronze, Stainless Steel |
| Flow Rate @ 120 ft of Head (Maximum) | Not Applicable |
| Full Load Current | 3.2/1.6 A |
| Feet of Head (Minimum) | 10 ft |
| Wire Rope Length | 15-1/2 in |
| Length | 15-1/2 in |
| Fits Chest Size | Not Applicable |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |