The DAYTON - 3HEW3 is a Variable Speed Belt, a type of V-belt used in power transmission and pneumatics. This belt is constructed to accommodate speed variations, with performance dependent on specific load conditions. It's made from gum rubber with raw edge coating and features a fabric cover, rubber body, and polyester cords for enhanced durability.
Key Features of the DAYTON - 3HEW3 Variable Speed Belt:
- Belt Material: Constructed from Gum Rubber, known for its flexibility and potential resistance to certain environmental factors like heat and chemicals.
- Construction: The cogged construction is compatible with smaller sheaves within a variety of speed control ranges.
- Operating Temperature Range: Rated for operation within the specified temperature range between -22 Degrees F and 194 Degrees F. Performance may vary based on actual temperature conditions.
- Resistance Properties: Possesses properties that could potentially resist high temperatures & oil exposure. Suitability depends on specific industrial environment requirements.
- Dimensions: Outside Length is 35-9/32" while Top Width measures at 1-3/8". These measurements are crucial for ensuring proper fit within various machinery or commercial equipment.
- Tensile Strength: Tensile strength is rated at 235 N/mm; performance under tension will depend on individual usage circumstances.
| Item | V-Belt |
|---|---|
| Belt Series | PowerMax |
| Industry Number | 2230V345 |
| Number of Ribs | 1 |
| Top Width | 1.38 in |
| Thickness | 0.44 in |
| Outside Length | 35.28 in |
| Material | NR |
| Pitch Length | 34-1/2 in |
| Reinforcing Cord Material | Polyester |
| Standards | ARPM |
| Groove Angle | 30 deg |
| Construction | Cogged |
| For Use With | Smaller Sheave With Wide Range Of Speed Controls |
| Belt Material | Rubber Compound |
| Edge Construction | Wrapped |
| Belt Coating | Rubber |
| Application | Heavy Industry, HVAC, Light Industry |
| Belt Trade Size | 2230V |
| Tensile Strength | 235 N/mm |
| Color | Black |
| Maximum Operating Temperature | 194 deg F |
| Minimum Operating Temperature | -22 deg F |
| Resistance Properties | Heat-Resistant, Oil-Resistant |
| Tooth Location | One Side |
| Profile Type | Single-Sided |
| Static Conductivity | Not Static Conductive |
| For Minimum Pulley Pitch Diameter | Not Applicable |
| Rib Width | 1-3/8 in |
| System of Measurement | Inch |
| Wire Color | Black |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |