| Item | Washdown Motor |
|---|---|
| Motor Design | Three-Phase |
| Phase | Three |
| HP | 5 hp |
| RPM Range | 3,001-3,600 |
| Voltage | 230/460V AC |
| Frame | 184T |
| Motor Frame Material | Steel |
| Motor Thermal Protection | None |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Conduit Box | Cast Aluminum with Buna N Gasketed Cover |
| Motor Bearings | Ball |
| Body Dia. | 8.38 in |
| Ins. Class | F |
| Hz | 60/50 Hz |
| Length Less Shaft | 12-3/4 in |
| Voltage Compatibility | 200-230/440V AC, 200-230/460V AC, 208-220/440V AC, 208-230/460V AC, 230/460V AC |
| Overall Length | 15-3/4 in |
| NEMA Design | B |
| Full Load Amps | 12.1/6.1 A |
| Endshields | Cast Aluminum |
| Includes | Shaft Key |
| Shaft Material | 303 |
| Motor Shaft Rotation | CCW, CW |
| Motor Application | General Purpose |
| Nominal Efficiency | 89.5% |
| Drain Plugs | (2) in Conduit Box, (4) Lead End, (4) Shaft End |
| Shaft Dia. | 1-1/8 in |
| Duty | Continuous |
| Nameplate RPM | 3,525 RPM |
| Footnotes | 8, 11 |
| Max. Ambient Temp. | 40 Degrees C |
| CC Number | CC030A |
| Shaft Length | 3 in |
| Application | High Humidity, Wet Environments and Areas Where Motor is Occasionally Exposed to High Pressure Washdowns |
| Motor Mounting Type | Rigid Base |
| Frame Material | Epoxy Coated |
| Motor Service Factor | 1.15 |
| Inverter Rated | Yes |
| Standards | CSA Certified (258525), UL Recognized (E47479), USDA Approved |
| Motor Mounting Position | Horizontal |
| Motor Shaft Design | Keyed |
| Endshield Material | Aluminum |
| Duty Cycle | Continuous |
| Motor Sub Application | Not Applicable |
| Voltage @ 50Hz | 190/380V AC |
| Finish | Epoxy-Coated |
| Maximum Run Time | Not Applicable |
| Duty Ratio | Not Applicable |
| Wire Rope Length | 15-3/4 in |
| Length | 15-3/4 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |