Rotary Shaft Seal, Design Code TC, Inside Diameter 95 mm, Outside Diameter 120 mm, Overall Width 12 mm, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 7 psi, Number of Lips 2, System of Measurement Metric, Case Coating None
| Item | Rotary Shaft Seal |
|---|---|
| Seal Type | Lip Seal |
| Inside Dia. | 95 mm |
| Outside Dia. | 120 mm |
| Width | 12 mm |
| Lip Material | Nitrile Rubber |
| Design Code | TC |
| Max. Pressure | 7 psi |
| Spring Reinforcement | Yes |
| Spring Type | Garter |
| Maximum Temperature | 250 deg F |
| System of Measurement | Metric |
| Number of Lips | 2 |
| Contact Type | Contact Seal |
| Hardness | 45 HRC @ 4 m/s and 55 HRC @ 10 m/s |
| Minimum Temperature | -40 deg F |
| Standards | DIN 3760 |
| Outside Diameter | 120 mm |
| Overall Width | 12 mm |
| Maximum Surface Speed | 999 mps |
| Maximum Pressure | 7 psi |
| For Fluid Type | Oil, Oil No.2, Acid, Alcohol, Automatic Transmission Fluid, Cutting Oil, E.P. Lubricants, Gasoline, Grease, Hydrochloric Acid Solution, Kerosene, Solution, Sulfuric, Water-Glycol |
| Inside Diameter | 95 mm |
| Case Coating | Uncoated |
| Resistance Properties | Alkaline-Resistant, Chemical-Resistant, Low Temperature-Resistant, High Temperature-Resistant, Oil-Resistant, Ozone-Resistant, Water-Resistant, Wear-Resistant |
| Industry Number | TC |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |