Pin Drive Anchor, Anchor Diameter 5/32 in, Overall Length 3/4 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Steel, Pin Material steel, Finish Zinc Plated, Head Type Round, Head Diameter 8 mm, Head Height Not Applicable, Nut Width Not Applicable, Washer Outside Diameter Not Applicable, Drill Bit Size Not Applicable, Minimum Installation Depth 5/8 in, Maximum Material Thickness Not Applicable, Ultimate Shear Strength (4,000 psi Concrete) Not Applicable
| Promotion Restriction | Not eligible for promotion |
|---|---|
| Item | Pin Drive Anchor |
| Compatible Material | Masonry, Wood, Concrete, Steel |
| Anchor Diameter | 5/32 in |
| Overall Length | 3/4 in |
| Material | Steel |
| Finish | Zinc Plated |
| Industry Standards | ASTM E1190, ICC-ES AC70 |
| Minimum Installation Depth | 5/8 in |
| Head Type | Round |
| Removable | Permanent |
| Features | CSI Spiral Drive Pins are Designed for Permanently Fastening a Fixture to Concrete, Concrete Over Steel Deck, Concrete Masonry Walls and A36 or A572 / A992 Structural Steel |
| Head Diameter | 8 mm |
| Anchor Material | Steel |
| System of Measurement | Inch |
| Material Quality Standards | 2012 IBC/IRC, 2015 IBC/IRC, 2018 IBC/IRC, 2021 IBC/IRC, ESR-2024, ICC-ES |
| Pin-Drive Anchor Type | Spiral Drive |
| Drill Bit Size | Not Applicable |
| Ultimate Tension Strength (4,000 psi Concrete) | Not Applicable |
| Maximum Material Thickness | Not Applicable |
| Nut Width | Not Applicable |
| Head Height | Not Applicable |
| Washer Outside Diameter | Not Applicable |
| Ultimate Shear Strength (4,000 psi Concrete) | Not Applicable |
| Thread Length | Not Applicable |
| Pin Material | steel |
| Thread Size | Not Applicable |
| Wire Rope Length | 3/4 in |
| Length | 3/4 in |
| Fits Chest Size | CSI Spiral Drive Pins are Designed for Permanently Fastening a Fixture to Concrete, Concrete Over Steel Deck, Concrete Masonry Walls and A36 or A572 / A992 Structural Steel |
| Country of Origin (subject to change) | China |
| Package Quantity | 100 |