Pin Drive Anchor, Anchor Diameter 9/64 in, Overall Length 3 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Steel, Pin Material steel, Finish Zinc Plated, Head Type Flat, Head Diameter 0.3 in, Head Height Not Applicable, Nut Width Not Applicable, Washer Outside Diameter 0.875 in, Drill Bit Size Not Applicable, Minimum Installation Depth 5/8 in, Maximum Material Thickness Not Applicable, Ultimate Shear Strength (4,000 psi Concrete) Not Applicable
| Promotion Restriction | Not eligible for promotion |
|---|---|
| Item | Pin Drive Anchor |
| Compatible Material | Masonry, Wood, Concrete, Steel |
| Anchor Diameter | 9/64 in |
| Overall Length | 3 in |
| Material | Steel |
| Finish | Zinc Plated |
| Industry Standards | 2009 IBC/IRC, 2012 IBC/IRC, 2015 IBC/IRC, 2018 IBC/IRC, ESR-2024, ICC-ES |
| Minimum Installation Depth | 5/8 in |
| Head Diameter | 0.3 in |
| Head Type | Flat |
| System of Measurement | Inch |
| Material Quality Standards | ASTM E1190, ICC-ES AC70 |
| Removable | Permanent |
| Washer Outside Diameter | 7/8 in |
| Features | Plastic Flute Mounted on the Pin Shank |
| Anchor Material | Steel |
| Thread Size | Not Applicable |
| Head Height | Not Applicable |
| Drill Bit Size | Not Applicable |
| Thread Length | Not Applicable |
| Nut Width | Not Applicable |
| Ultimate Shear Strength (4,000 psi Concrete) | Not Applicable |
| Maximum Material Thickness | Not Applicable |
| Ultimate Tension Strength (4,000 psi Concrete) | Not Applicable |
| Pin Material | steel |
| Wire Rope Length | 3 in |
| Length | 3 in |
| Fits Chest Size | Plastic Flute Mounted on the Pin Shank |
| Country of Origin (subject to change) | China |
| Package Quantity | 100 |