Sleeve Anchor, System of Measurement Inch, Anchor Diameter 1/2 in, Overall Length 4 3/4 in, Thread Size Not Applicable, Drive Type External Hex, Head Type Hex, Nut Width 0.625 in, Washer Outside Diameter 1 in, Material Steel, Material Grade/Class Grade 8, Finish Zinc Plated, Drill Bit Size 1/2 in, Compatible Material Concrete, Minimum Installation Torque 40 ft-lb, Maximum Installation Torque 40 ft-lb, Minimum Installation Depth 2 1/2 in, Minimum Hole Depth 2 1/2 in
| Promotion Restriction | Not eligible for promotion |
|---|---|
| Item | Sleeve Anchor |
| Compatible Material | Concrete |
| Anchor Diameter | 1/2 in |
| Overall Length | 4-3/4 in |
| Sub-Brand | Power-Bolt+ |
| Material Type | Steel |
| Finish | Zinc Plated |
| Seismic Approved | Yes |
| Head Type | Hex |
| Drive Type | External Hex |
| ICC Approved for Cracked Concrete | Yes |
| Drill Bit Size | 1/2 in |
| Thread Size | Not Applicable |
| Maximum Material Thickness | 1-1/2 in |
| Minimum Installation Depth | 2-1/2 in |
| Material Grade | 8 |
| ICC Approved for Un-Cracked Concrete | Yes |
| Industry Standards | ICC-ES AC193 |
| Max. Work Thickness | 1-1/2 in |
| Material | Steel |
| Min. Embedment | 2-1/2 in |
| Anchor Length | 4-3/4 in |
| Series | Power-Bolt |
| Removable | Removable |
| Minimum Installation Torque | 40 ft-lb |
| Manufacturer Location | Globally Sourced |
| Thread Type | Coarse |
| System of Measurement | Inch |
| Material Grade/Class | Grade 8 |
| Nut Width | 5/8 in |
| Maximum Installation Torque | 40 ft-lb |
| Minimum Hole Depth | 2-1/2 in |
| Material Quality Standards | ACI 355.2/ASTM E488 |
| Minimum Material Thickness | 5 in |
| Washer Outside Diameter | 1 in |
| Wire Rope Length | 4-3/4 in |
| Length | 4-3/4 in |
| Shell Material | Steel |
| Country of Origin (subject to change) | China |
| Package Quantity | 25 |