Sleeve Anchor, System of Measurement Inch, Anchor Diameter 3/8 in, Overall Length 1 7/8 in, Thread Size Not Applicable, Drive Type External Hex, Head Type Hex, Nut Width 0.5 in, Washer Outside Diameter 0.73 in, Material Steel, Material Grade/Class Grade 8, Finish Zinc Plated, Drill Bit Size 3/8 in, Compatible Material Concrete, Minimum Installation Torque 20 ft-lb, Maximum Installation Torque 20 ft-lb, Minimum Installation Depth 1 5/8 in, Minimum Hole Depth 1 5/8 in
| Promotion Restriction | Not eligible for promotion |
|---|---|
| Item | Sleeve Anchor |
| Compatible Material | Concrete |
| Anchor Diameter | 3/8 in |
| Overall Length | 1-7/8 in |
| Sub-Brand | Power-Bolt+ |
| Material Type | Steel |
| Finish | Zinc Plated |
| Seismic Approved | Yes |
| Head Type | Hex |
| Drive Type | External Hex |
| ICC Approved for Cracked Concrete | Yes |
| Drill Bit Size | 3/8 in |
| Thread Size | Not Applicable |
| Maximum Material Thickness | 1/4 in |
| Minimum Installation Depth | 1-5/8 in |
| ICC Approved for Un-Cracked Concrete | Yes |
| Material Grade | 8 |
| Industry Standards | ICC-ES AC193 |
| Material | Steel |
| Min. Embedment | 1-5/8 in |
| Anchor Length | 1-7/8 in |
| Max. Work Thickness | 1/4 in |
| Material Quality Standards | ACI 355.2/ASTM E488 |
| Series | Power-Bolt |
| Nut Width | 1/2 in |
| Removable | Removable |
| Thread Type | Coarse |
| Minimum Installation Torque | 20 ft-lb |
| Washer Outside Diameter | 0.73 in |
| Manufacturer Location | Globally Sourced |
| System of Measurement | Inch |
| Minimum Hole Depth | 1-5/8 in |
| Minimum Material Thickness | 4-1/2 in |
| Maximum Installation Torque | 20 ft-lb |
| Material Grade/Class | Grade 8 |
| Wire Rope Length | 1-7/8 in |
| Length | 1-7/8 in |
| Shell Material | Steel |
| Country of Origin (subject to change) | China |
| Package Quantity | 50 |