Lock Washer, Wedge, Carbon Steel, Finish Zinc, Fits Bolt Sizes 3/16 In., 3/16 In., Inside Dia. 0.203 In., Outside Dia. 0.401 In., Thickness 0.080 In., Color Silver, Rockwell Hardness HRC 40-55 Case Hardened, General Purpose, For Use With Bolts, Package Quantity 200
| Item | Wedge Lock Washer |
|---|---|
| Material | Steel |
| Finish | Zinc Plated |
| For Screw Size | 3/16 in |
| Outside Diameter | 0.401 in |
| Minimum Thickness | 0.08 in |
| Maximum Thickness | 5/64 in |
| Inside Diameter | 0.203 in |
| System of Measurement | Inch |
| Material Grade/Class | Case Hardened |
| Application | General Purpose |
| Rockwell Hardness | HRC40 |
| Package Quantity | 200 |
| For Use With | Bolts |
| Color | Silver |
| Assembly Thickness | 5/64 in |
| Resistance Properties | Shock-Resistant, Vibration-Resistant |
| Pack Size | Small Pack |
| Lock Washer Type | Wedge Lock |
| Dimensional Standards | Not Applicable |
| Type | Wedge Lock Washer |
| X-Ray Detectable | Not Applicable |
| FDA Approved | Not Applicable |
| Minimum Inside Diameter | 13/64 in |
| Metal Detectable | Not Applicable |
| Inside Diameter - Maximum | 13/64 in |
| Reusable | Not Reusable |
| Tooth Length - Minimum | Not Applicable |
| Outside Diameter - Maximum | 13/32 in |
| Bearing Width - Minimum | Not Applicable |
| Tooth Length - Maximum | Not Applicable |
| MIL-SPEC Standards | Not Applicable |
| Outside Diameter - Minimum | 13/32 in |
| Hardness | 40 HRC |
| Section Width - Minimum | Not Applicable |
| Shell Material | Steel |
| Wire Color | Silver |
| Country of Origin (subject to change) | Taiwan, Province of China |