Pressure Sensor
| Item | Indicating Differential Transmitter |
|---|---|
| Hazardous Location Specification | Class I, Div 1, Group A, B, C, D |
| Fitting Material | Stainless Steel |
| Process Media Temperature - Maximum | 185 deg F |
| Overall Length | 6.3 in |
| Features | Automatic Sensor Temperature Compensation Improves Performance of Device for Accurate Measurement Under Different Operating Environment, Configurable Using Zero/Span Buttons Means No Calibrator Required Reducing Time to Install and Running, Fail-Mode Process Function Stores Configuration Settings in the Event of Shutdown or Power-Loss Provides for Faster Restart to Getting Application Back On-Line, Range-Ability and Selectable Engineering Units |
| Overall Height | 13.3 in |
| Number of Digits | 5 |
| Process Connection Gender | Female |
| NEMA Enclosure Rating | 4X |
| Display Units | in wc |
| Housing Material | Stainless Steel |
| Thermal Error | +/-0.125% |
| Burst Pressure | 10,000 psi |
| IP Rating | IP66 |
| Digital Display Screen Type | LCD |
| Pressure Measurement - Maximum | 6 in wc |
| Response Time | 0.12 sec |
| Standards | CE, FM |
| Output Power | 4 to 20 mA |
| Display Type | Digital |
| Intrinsic Safety | Not Specified Intrinsically Safe |
| Accuracy | +/-0.08% of Full Scale |
| Includes NIST-Traceable Calibration Certificate | NIST-Traceable Calibration Certificate Included |
| Process Media Temperature - Minimum | -40 deg F |
| Number of Wires | 3 |
| Overall Width | 6.8 in |
| Overall Diameter | 7-1/2 in |
| Overpressure | 2,000 psi |
| Electrical Connection | Screw Terminals |
| Input Voltage | 11.9 to 45V DC |
| Process Connection Size | 1/4 in |
| Pressure Measurement - Minimum | 0 in wc |
| Process Connection Type | NPT |
| Series | 3100D |
| Loop Resistance - Maximum | 1,500 Ohm Max |
| Wire Rope Length | 6.3 in |
| Length | 6.3 in |
| Fits Chest Size | Automatic Sensor Temperature Compensation Improves Performance of Device for Accurate Measurement Under Different Operating Environment, Configurable Using Zero/Span Buttons Means No Calibrator Required Reducing Time to Install and Running, Fail-Mode Process Function Stores Configuration Settings in the Event of Shutdown or Power-Loss Provides for Faster Restart to Getting Application Back On-Line, Range-Ability and Selectable Engineering Units |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |