Electric Drum Pump, Hose Inside Dia. 1 in, Max. Head Pressure 4.32 psi, Max. Outlet Pressure 4.32 psi, For Use With Flammable Liquids, Rated Voltage 115 V AC, Plug Type NEMA 5-15, Pump Connection ID 1 1/2 in, Suction Tube OD 1 1/2 in, Hose Length 5 ft, Suction Tube Length 40 in, Cord Length 12 ft, Includes Bung Adapter No, Runs Dry No, Nozzle Operation Not Applicable, Thermal Protection No, Frequency (Hz) 60 Hz, Power Source Corded Electric, Variable Speed Yes, Includes Discharge Hose Yes
| For Use With | Flammable Liquids |
|---|---|
| Item | Electric Drum Pump |
| Includes | 12 ft Cord with No Plug, Motor, Static Kit |
| Max. Viscosity | 400 cps |
| Motor Type | Electric AC |
| Power Source | Corded Electric |
| Outlet Size | 1" barb |
| Wetted Materials | Brass, PTFE, Stainless Steel |
| Voltage | 115V AC |
| Motor Enclosure | TEXP |
| Metered | No |
| Motor RPM | 3,450 rpm |
| Standards | QPS |
| Housing Material | Stainless Steel |
| Type | Motor and Tube |
| Pump Body Material | Stainless Steel |
| pH Range | 7 |
| Discharge Tube Outlet OD Size | 1-15/32 in |
| Adapter Material | Polypropylene |
| Discharge Tube Outlet ID Size | 1 in |
| Suction Tube Outlet O.D. Size | 1-1/2 in |
| Application | Flammable Liquids |
| Self-Priming | Yes |
| HP | 1/4 |
| Phase | Single |
| Action Type | Piston |
| Max. Pressure | 4.32 psi |
| Agency Compliance | CSA |
| Max. Liquid Temp. | 150 deg F |
| GPM | 7 |
| Discharge Tubing Material | Polyethylene |
| Overall Length | 55 in |
| DEF Compatible | No |
| Max. Temp. | 150 deg F |
| Suction Tube Type | Constant |
| Max. Head | 10 ft |
| Suction Tube Length | 40 in |
| Discharge Tube Length | 1 in |
| Inlet Size | 1-1/2 in |
| RPM | 3450 |
| Height | 40 in |
| Hz | 60 Hz |
| Seal Material | PTFE |
| Max. GPM for Water | 7 |
| Max. GPM for Oil | 5 |
| Thermal Protection | No |
| Max. Head - Pumps | 10 ft |
| Hose Tube Material | Polyethylene |
| Housing Material - Pumps | Stainless Steel |
| Motor HP | 0.25 |
| Variable Speed | Yes |
| Hose Outside Dia. | 1-3/8 in |
| Max. Head Pressure | 4.32 psi |
| Food Grade | No |
| Diesel Exhaust Fluid Compatible | Yes |
| For Container Size | 55 gal |
| Max. Flow Rate | 7 gpm |
| Cord Length | 12 ft |
| Bung Connection Dia. | 2 in |
| Suction Tube OD | 1-1/2 in |
| Suction Tube ID | 1-1/2 in |
| Includes Discharge Hose | Yes |
| Min. Fluid Temp. | -20 deg F |
| Includes Bung Adapter | No |
| Discharge Tube Outlet OD | 1-5/16 in |
| Full Load Amps | 6.2 A |
| Runs Dry | No |
| Hose Inside Dia. | 1 in |
| Discharge Connection Type | Hose Barb |
| Includes Suction Tube | Yes |
| Hose Length | 5 ft |
| Suction Tube Material | 316 Stainless Steel |
| For Container Type | Drum |
| Frequency (Hz) | 60 Hz |
| Series | TT |
| Includes Nozzle | No |
| For Media Type | Acetic Acid, Ammonia, Ammonium Hydroxide, Antifreeze, Biodiesel, Calcium Chloride, Chromic Acid, Citric Acid, Cyclohexane, DEF, Diesel Fuel, E85, Ethanol, Ethyl Acetate, Ethylene Glycol, Formaldehyde, Formic Acid, Gasoline, Glycerin, Heptane, Hexane, Hydraulic Oil, Hydrazine, Isopropanol, Kerosene, Ketones, Lacquer Thinners, Methanol, Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide, Stoddard Solvent, Toluene, Trichlorethylene, Water, Xylene |
| Noise Level | 81 dB |
| Duty Cycle | Continuous |
| Plug Type | NEMA 5-15 |
| Pump Connection Type | Smooth Bore |
| Number of Phases | 1 |
| Max. Fluid Temp. | 150 deg F |
| Discharge Tube Outlet ID | 1 in |
| Not Recommended Chemicals | Bleach, Concentrated Nitric Acid, Glacial Acetic Acid, Hydrochloric Acid 100%, Hydrochloric Acid 20%, Hydrochloric Acid 37%, Hydrofluoric Acid 100%, Hydrofluoric Acid 20%, Hydrofluoric Acid 75%, Nitric Acid 10% Solution, Nitric Acid 20% Solution, Nitric Acid 50% Solution, Phosphoric Acid 40% Solution, Sulfuric Acid 10% to 75%, Sulfuric Acid 75% to 100%, Sulfuric Acid up to 10% |
| Compatible Chemicals | Acetic Acid 20%, Acetic Acid 80%, Acetone, Ammonia (Liquids), Ammonium Hydroxide, Anhydrous Ammonia, Antifreeze (Coolant), Automatic Transmission Fluid, Biodiesel, Brake Fluid, Calcium Chloride, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Citric Acid 50%, Cyclohexane, DEF, Deionized Water, Diesel Fuel, E85, Ethyl (Ethanol), Ethyl Acetate, Ethylene Glycol, Formaldehyde, Formaldehyde 40%, Formic Acid, Fresh Water, Gasoline, Glycerin, Heptane, Hexane, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Hydrazine, Isopropyl (Isopropanol), Kerosene, Lacquer Thinners, Methyl (Methanol), Methyl Ethyl Ketone (MEK), Naphtha, Paint Thinner, Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Stoddard Solvent (Mineral Spirits), Toluene, Trichlorethylene (50%), Turpentine, Windshield Washer Fluid, Xylene |
| Rated Voltage | 115 V AC |
| Max. Outlet Pressure | 4.32 psi |
| Grease | NT |
| Explosion Proof | Yes |
| Gear Lube | NT |
| Motor Horsepower | 0.3333 HP |
| Filter Included | Not Applicable |
| Housing Finish | Not Applicable |
| Maximum Head Pressure | 4.32 psi |
| Includes Follower Plate | No Follower Plate Included |
| Wetted Material | PTFE/Stainless Steel |
| Pump Connection ID | 1-1/2 in |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Container Cover Type Included | No Cover Included |
| Chemical Compatibility | Acetic Acid 20%, Acetic Acid 80%, Acetone, Ammonia Liquid, Ammonium Hydroxide, Anhydrous Ammonia, Antifreeze Coolant, Automatic Transmission Fluid, Biodiesel, Brake Fluid, Calcium Chloride, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Citric Acid 50%, Cyclohexane, DEF, Deionized Water, Diesel Fuel, E85, Ethanol, Ethyl Acetate, Ethylene Glycol, Formaldehyde, Formaldehyde 40%, Formic Acid, Fresh Water, Gasoline, Glycerin, Heptane, Hexane, Petroleum Oil, Synthetic Oil, Hydrazine, Isopropanol, Kerosene, Lacquer Thinners, Methanol, Methyl Ethyl Ketone, Naphtha, Paint Thinner, Potassium Hydroxide 50%, Salt Water, Sodium Bicarbonate 10%, Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide 20%, Sodium Hydroxide 50%, Sodium Hydroxide 80%, Stoddard Solvent, Toluene, Trichlorethylene 50%, Turpentine, Windshield Washer Fluid, Xylene |
| Container Size Included | Not Applicable |
| Motor Speed | 3,450 rpm |
| Hose Cover Material | Polyethylene |
| Adapter Connection Diameter | 2 in |
| Pump Technology | Screw |
| Hose Inside Diameter | 1 in |
| Maximum Head | 10 ft |
| Includes Spout | Yes |
| Meter Type Included | No Meter Included |
| Maximum Outlet Pressure | 4.32 psi |
| Maximum Fluid Temperature | 150 deg F |
| Pump Connection OD | 1-1/2 in |
| Maximum Flow Rate | 7 gpm |
| Full Load Current | 6.2 A |
| Minimum Fluid Temperature | -20 deg F |
| Hose Outside Diameter | 1-5/16 in |
| Mount Type | Bung |
| Spout Connection Type | Hose Barb |
| Frequency | 60 Hz |
| Static Protection | Grounding Line Included |
| Spout Material | Stainless Steel |
| Compatible NLGI Viscosity Grade | Not Applicable |
| Container Type Included | Not Applicable |
| Maximum Viscosity | 400 cps |
| Spout Discharge Size | 1 in |
| Spout Length | 1 in |
| Nozzle Material | Not Applicable |
| Nozzle Operation | Not Applicable |
| Meter Unit Of Measure | Not Applicable |
| Adapter Connection Standard | Not Applicable |
| Nozzle Fluid Compatibility | Not Applicable |
| Power Source - TS Only | Corded Electric |
| Wire Rope Length | 55 in |
| Power Source - old | Corded Electric |
| Length | 55 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |