Split Lock Washer, Standard, 18-8 Stainless Steel, Finish NL-19(r), Fits Bolt Sizes 7/8 In., 7/8 In., Inside Dia. 0.878 In., Outside Dia. 1.455 In., Thickness 0.219 In., Thickness Tolerance +/-0.005 In., Color Silver, Rockwell Hardness C35, Metalworking, Fastening, For Use With Machine Screws and Nuts, Meets/Exceeds ANSI B18.21.1, Package Quantity 10
| Item | Split Lock Washer |
|---|---|
| Material | 18-8 Stainless Steel |
| Finish | NL-19 |
| For Screw Size | 7/8 in |
| Outside Diameter | 1.455 in |
| Minimum Thickness | 7/32 in |
| Maximum Thickness | 7/32 in |
| Standards | ANSI B18.21.1 |
| System of Measurement | Inch |
| Inside Diameter | 0.878 in |
| Material Grade/Class | 18-8 |
| Color | Silver |
| Rockwell Hardness | C35 |
| Application | Fastening, Metalworking |
| Package Quantity | 10 |
| Thickness Tolerance | +/-0.005 in |
| Resistance Properties | Corrosion-Resistant |
| Lock Washer Type | Split Lock |
| For Use With | Machine Screws and Nuts |
| Pack Size | Small Pack |
| Dimensional Standards | ANSI B18.21.1 |
| Minimum Inside Diameter | 57/64 in |
| Inside Diameter - Maximum | 7/8 in |
| Washer Type | Regular |
| X-Ray Detectable | X-Ray Detectable |
| Hardness | 35 HRC |
| Section Width - Minimum | 1-19/32 in |
| Outside Diameter - Maximum | 1-29/64 in |
| Tooth Length - Maximum | Not Applicable |
| Outside Diameter - Minimum | Not Applicable |
| Tooth Length - Minimum | Not Applicable |
| Bearing Width - Minimum | 1-19/32 in |
| Type | Split Lock Washer |
| MIL-SPEC Standards | ASME B18.21.1 |
| FDA Approved | FDA Approved |
| Metal Detectable | Metal Detectable |
| Shell Material | Stainless Steel |
| Wire Color | Silver |
| Country of Origin (subject to change) | United States |