GARANT Diabolo: Special geometry, coating and carbide, specially for hard machining. Dimensions similar to DIN 6527. Application: For profile milling as finishing. Plunge cutting only to shallow depths. Tolerance nominal Dia. e8 No. of teeth Z: 4 Helix angle: 50 degrees Direction of infeed: horizontal and oblique Shank: DIN 6535 HA to h6 No. of teeth Z: 4 Flute length Lc: 12 mm Overall length L: 57 mm Shank Dia. Ds: 6 mm Feed fz for side milling in steel < 65 HRC: 0.016 mm
| Overall Length | 57 mm |
|---|---|
| Milling Diameter | 3 mm |
| Number of Flutes | 4 |
| End Mill Style | Square |
| Finish | TiAlN |
| Length of Cut | 12 mm |
| End Mill Cutting Type | HPC |
| Correction Factor Fz | 1.5 |
| Maximum Cutting Depth Ap Max When Side Milling | 12 mm |
| Tolerance Nominal Diameter | e8 |
| Color Ring | red |
| Corner Chamfer Angle | 90 deg |
| Cutting Direction | horizontal, oblique |
| Shank Type | DIN 6535 HA to h6 |
| Type | H |
| Cutting Width Ae for Milling Operation | 0.05×D for side milling |
| Shank Tolerance | h6 |
| Min. Cutting Depth | 0.01 mm |
| Type of Product | End Mill |
| Helix Angle | 50 deg |
| Shank Dia. | 6 mm |
| Standard | DIN 6527 |
| Feed Fz For Side Milling in Steel < 65 HRC | 0.016 mm |
| Series | Diabolo |
| End Mill Material | Carbide |
| Coolant Through | No |
| Country of Origin (subject to change) | Germany |
| Package Quantity | 1 |