Sewage Ejector Pump, HP 10, Rated Voltage 230V AC, Phase - Pumps 3, Amps 31.00 A, Motor Type 3-Phase, Body Material Cast Iron, Impeller Material Cast Iron, Shaft Seal Material - Pumps Ceramic, Tandem Carbon, Switch Actuation No Switch Included, Switch Electrical Connection No Switch Included, On Point Not Applicable, Off Point Not Applicable, Flow Rate @ 20 Ft. of Head 950 gpm, Flow Rate @ 40 Ft. of Head 550 gpm, Flow Rate @ 60 Ft. of Head 100 gpm, Max. Diameter Solids 3 in, Body Dia. 19 3/4 in
| HP | 10 |
|---|---|
| Phase - Pumps | 3 |
| Switch Actuation | No Switch Included |
| Body Material | Cast Iron |
| Base Material | Cast Iron |
| Max. Head | 65 ft |
| Impeller Material | Cast Iron |
| Max. Diameter Solids | 3 in |
| Diameter | 19-3/4 in |
| Cord Length - Pumps | 20 ft |
| Switch Type | None |
| Max. Dia. Solids | 3 in |
| Voltage - Pumps | 240V AC |
| Housing Material | Cast Iron |
| Max. Head - Pumps | 65 ft |
| Shaft Seal Material - Pumps | Ceramic, Tandem Carbon |
| Amps | 31 |
| Pump Type | Manual |
| Max. Liquid Temp. | 104 deg F |
| Bearing Type | Ball |
| GPM of Water @ 50 Ft. of Head | 350 |
| GPM of Water @ 60 Ft. of Head | 100 |
| Shaft Seal | Carbon, Ceramic |
| GPM of Water @ 30 Ft. of Head | 750 |
| Voltage | 230V |
| Item - Sewage Pumps | Submersible Sewage Pump |
| Switch Type - Pumps | No Switch Included |
| Pump Body Material | Cast Iron |
| Item | Sewage Ejector Pump |
| Cord Length | 25 ft |
| GPM of Water @ 25 Ft. of Head | 850 |
| Impeller Material - Pumps | Cast Iron |
| Discharge NPT | 4 in |
| Phase | Three |
| Motor Type | 3-Phase |
| GPM of Water @ 40 Ft. of Head | 550 |
| Input Phase AC | 3 |
| GPM of Water @ 20 Ft. of Head | 950 |
| Thermal Protection | No |
| Agency Compliance | CSA Certified, UL Listed |
| Amps - Pumps | 31 |
| Height | 41.3 in |
| Motor RPM | 1,750 |
| Manufacturers Warranty Length | 1 yr |
| Flow Rate @ 40 Ft. of Head | 550 gpm |
| Discharge Standard | Flanged |
| Discharge | 4 in (Flanged) |
| Flow Rate @ 60 Ft. of Head | 100 gpm |
| Off Point | Not Applicable |
| On Point | Not Applicable |
| Body Dia. | 19-3/4 in |
| Switch Electrical Connection | No Switch Included |
| Overall Height | 41-1/4 in |
| RPM | 1,750 |
| Duty Cycle | Continuous |
| Rated Voltage | 230V AC |
| Flow Rate @ 20 Ft. of Head | 950 gpm |
| Discharge Dia. | 4 in |
| Type | Manual |
| Shaft Seal Material | Ceramic, Carbon |
| Standards | CSA Certified, UL Listed |
| Series | 4NS |
| Alert Messaging | Not Applicable |
| Frequency | 60 Hz |
| Width at Widest Point | 19-3/4 in |
| Control Panel Functions | Not Applicable |
| Horsepower | 10 |
| For Media Type | Sewage Water |
| Current | 31 A |
| Shaft Seal Type | Single Mechanical |
| Feet of Head - Maximum | 65 ft |
| Liquid Temperature - Maximum | 104 deg F |
| Solids Diameter - Maximum | 3 in |
| Alerts Indicated | Not Applicable |
| Motor Housing Material | Cast Iron |
| Alert Output | Not Applicable |
| Volute Material | Cast Iron |
| Rotation Speed - Maximum | 1,750 rpm |
| Requires Control Panel | Control Panel Required |
| Discharge Gender | Female |
| Connectivity | Not Applicable |
| Discharge Diameter | 4 in |
| Power Source | Corded Electric |
| Body Diameter | 19-3/4 in |
| Discharge Orientation | Horizontal |
| Power Source - TS Only | Corded Electric |
| Power Source - old | Corded Electric |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |