Sewage Ejector Pump, HP 3, Rated Voltage 200V AC, Phase - Pumps 3, Amps 15.20 A, Motor Type 3-Phase, Body Material Cast Iron, Impeller Material Cast Iron, Shaft Seal Material - Pumps Silicone Carbide, Switch Actuation No Switch Included, Switch Electrical Connection No Switch Included, On Point Not Applicable, Off Point Not Applicable, Flow Rate @ 15 Ft. of Head 390 gpm, Flow Rate @ 20 Ft. of Head 350 gpm, Flow Rate @ 40 Ft. of Head 160 gpm, Max. Diameter Solids 2 1/2 in, Body Dia. 15 1/2 in
| HP | 3 |
|---|---|
| Phase - Pumps | 3 |
| Switch Actuation | No Switch Included |
| Body Material | Cast Iron |
| Base Material | Cast Iron |
| Max. Head | 54 ft |
| Impeller Material | Cast Iron |
| Max. Diameter Solids | 2-1/2 in |
| Item | Sewage Ejector Pump |
| Motor Type | 3-Phase |
| Switch Type - Pumps | No Switch Included |
| Input Phase AC | 3 |
| Voltage - Pumps | 200V AC |
| Pump Type | Manual |
| Amps | 15.2 |
| Max. Dia. Solids | 2-1/2 in |
| Cord Length | 20 ft |
| GPM of Water @ 30 Ft. of Head | 265 |
| GPM of Water @ 25 Ft. of Head | 310 |
| Voltage | 200V |
| GPM of Water @ 15 Ft. of Head | 390 |
| Thermal Protection | No |
| GPM of Water @ 40 Ft. of Head | 160 |
| Housing Material | Cast Iron |
| Phase | Three |
| Amps - Pumps | 15.2 |
| Motor RPM | 1,750 |
| Pump Body Material | Cast Iron |
| Item - Sewage Pumps | Submersible Sewage Pump |
| Shaft Seal | Silicon Carbide |
| Shaft Seal Material - Pumps | Silicone Carbide |
| Diameter | 15-1/2 in |
| Max. Head - Pumps | 54 ft |
| Impeller Material - Pumps | Cast Iron |
| Max. Liquid Temp. | 104 Degrees F (Continuous), 140 Degrees F (Intermittent) |
| Height | 27-13/21" |
| Bearing Type | Ball |
| Cord Length - Pumps | 20 ft |
| Discharge NPT | 3 in |
| Agency Compliance | CSA Certified, UL Listed |
| GPM of Water @ 20 Ft. of Head | 350 |
| Switch Type | None |
| Manufacturers Warranty Length | 1 yr |
| Discharge | 3 in (Flanged) |
| Duty Cycle | Continuous |
| Discharge Dia. | 3 in |
| Overall Height | 27-5/8 in |
| Off Point | Not Applicable |
| Discharge Standard | Flanged |
| Switch Electrical Connection | No Switch Included |
| Body Dia. | 15-1/2 in |
| On Point | Not Applicable |
| Flow Rate @ 15 Ft. of Head | 390 gpm |
| Flow Rate @ 40 Ft. of Head | 160 gpm |
| Rated Voltage | 200V AC |
| Flow Rate @ 20 Ft. of Head | 350 gpm |
| RPM | 1,750 |
| Type | Manual |
| Rotation Speed - Maximum | 1,750 rpm |
| Alert Messaging | Not Applicable |
| Alerts Indicated | Not Applicable |
| Shaft Seal Type | Single Mechanical |
| Shaft Seal Material | Silicon |
| Feet of Head - Maximum | 54 ft |
| Flow Rate @ 10 ft of Head | 450 gpm |
| Requires Control Panel | Control Panel Required |
| Discharge Diameter | 3 in |
| Standards | CSA Certified, UL Listed |
| Frequency | 60 Hz |
| Power Source | Corded Electric |
| For Media Type | Sewage Water |
| Series | WS-D3 |
| Connectivity | Not Applicable |
| Width at Widest Point | 15-1/2 in |
| Discharge Orientation | Vertical |
| Discharge Gender | Female |
| Motor Housing Material | Cast Iron |
| Control Panel Functions | Not Applicable |
| Liquid Temperature - Maximum | 104 deg F |
| Current | 15.2 A |
| Alert Output | Not Applicable |
| Body Diameter | 15-1/2 in |
| Volute Material | Cast Iron |
| Solids Diameter - Maximum | 2-1/2 in |
| Horsepower | 3 |
| Power Source - TS Only | Corded Electric |
| Power Source - old | Corded Electric |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |