Centrifugal Pump, Phase Single, Pump Housing Material Stainless Steel, Horsepower 2 hp, Nameplate Voltage 115/230V AC, Flow Rate @ 60 ft of Head (Maximum) 84 gpm, Flow Rate @ 80 ft of Head (Maximum) 40 gpm, Maximum Feet of Head 84 ft, Compatible Intake Pipe Size 1 1/2 in, Intake Type NPT, Compatible Discharge Pipe Size 1 1/4 in, Discharge Type NPT, Motor Enclosure Open Dripproof, Maximum Flow Rate 95.2 gpm, Flow Rate @ 50 ft of Head (Maximum) 96 gpm, Priming Manual
| Discharge Pump Type | Centrifugal Pump |
|---|---|
| HP - Pumps | 2 HP |
| Phase - Pumps | 1 |
| Voltage - Pumps | 115V AC, 230V AC |
| Max. Pressure - Pumps | 125 psi |
| Housing Material - Pumps | Cast Iron |
| Inlet Size - Pumps | 1-1/2 in NPT |
| Outlet Size - Pumps | 1-1/4 in NPT |
| Motor Enclosure - Pumps | Open Dripproof |
| Best Efficiency Range GPM @ Head | 51.94 to 89.04 gpm @ 77.7 to 55 ft |
| Seal Material | Stainless Steel, Buna Elastomer, Carbon, Ceramic |
| Max. Specific Gravity | 1 |
| Amps | 14.6-14.8 |
| Impeller Type | enclosed |
| Length | 13 in |
| Best Efficiency GPM @ PSI | 74.2 gpm @ 66 ft |
| Max. Head | 84 ft |
| Frame | 56YZ |
| GPM of Water @ 60 Ft. of Head | 82.3 gpm |
| GPM of Water @ 50 Ft. of Head | 95.2 gpm |
| Includes | Manual |
| Inlet Pressure | 1 psi |
| Height | 10-3/4 in |
| Motor RPM | 2,850 rpm |
| Hz | 60 |
| GPM of Water @ 70 Ft. of Head | 66.9 gpm |
| Max. Liquid Temp. | 212 deg F |
| Installation Position | Horizontal |
| Phase | Single |
| Wetted Materials | 18-8 Stainless Steel, AISI 316L Stainless Steel, Buna, Carbon, Ceramic |
| Duty | Continuous |
| Motor Enclosure | Open Drip Proof |
| Max. Case Pressure | 125 psi |
| Impeller Material | Stainless Steel |
| Agency Compliance | NSF 61 |
| Port Rotation | Top |
| Motor Type | 1 - Phase; Open Dripproof |
| GPM of Water @ 80 Ft. of Head | 45.9 gpm |
| Item | Centrifugal Pump |
| Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
| Seal Type | Mechanical |
| Compatible with Media Type | Water |
| Pumping Application | Booster Services |
| Flow Rate @ 40 ft of Head (Maximum) | Not Applicable |
| Compatible Intake Pipe Size | 1-1/2 in |
| Overall Height | 10.7 in |
| Flow Rate @ 280 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 80 ft of Head (Maximum) | 40 gpm |
| Best Efficiency Flow | 74.2 gpm |
| Flow Rate @ 60 ft of Head (Maximum) | 84 gpm |
| Flow Rate @ 140 ft of Head (Maximum) | Not Applicable |
| Standards | CSA Certified, NSF 61 Certified |
| Specific Gravity (Maximum) | 1 |
| Overall Width | 6.7 in |
| Motor Frame Designation | 56YZ |
| Priming | Manual |
| Shut Off Pressure (Maximum) | 75 psi |
| Flow Rate @ 70 ft of Head (Maximum) | 68 gpm |
| Flow Rate @ 260 ft of Head (Maximum) | Not Applicable |
| Best Efficiency Head | 66 ft |
| Flow Rate @ 180 ft of Head (Maximum) | Not Applicable |
| Wetted Material | Carbon, Stainless Steel, Buna Elastomers, Ceramic Stationary |
| Flow Rate @ 200 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 220 ft of Head (Maximum) | Not Applicable |
| Maximum Feet of Head | 84 ft |
| Overall Length | 13 in |
| Flow Rate @ 50 ft of Head (Maximum) | 96 gpm |
| Discharge Type | NPT |
| Maximum Flow Rate | 95.2 gpm |
| Impeller Design | Closed |
| Shaft Material | Stainless Steel |
| Maximum Media Temperature | 212 deg F |
| Flow Rate @ 90 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 160 ft of Head (Maximum) | Not Applicable |
| Horsepower | 2 |
| Flow Rate @ 300 ft of Head (Maximum) | Not Applicable |
| Features | Easy Accessible Vent, High Efficiency Impeller, Prime and Drain Connections |
| Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
| Frequency | 60 Hz |
| Series | MCC |
| Compatible Discharge Pipe Size | 1-1/4 in |
| Pump Housing Material | Stainless Steel |
| Intake Type | NPT |
| Maximum RPM | 3,500 rpm |
| Minimum Flow Rate | 45.9 gpm |
| Flow Rate @ 100 ft of Head (Maximum) | Not Applicable |
| Duty Cycle | Continuous |
| Flow Rate @ 10 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 30 ft of Head (Maximum) | Not Applicable |
| For Use With Potable Systems | Yes |
| Flow Rate @ 240 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 120 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 15 ft of Head (Maximum) | Not Applicable |
| Nameplate Voltage | 115/230V AC |
| Flow Rate @ 20 ft of Head (Maximum) | Not Applicable |
| Mounting Orientation | Horizontal |
| Viscosity (Maximum) | Not Applicable |
| Solid Diameter (Maximum) | 0.13 in |
| Motor Speed - Maximum | 3,500 rpm |
| Discharge Position | Center |
| Chemical Compatibility | Water |
| Inlet Diameter | 1-1/2 in |
| Drive Coupling Type | No Coupling |
| Shaft Seal Type | Mechanical |
| Feet of Head (Maximum) | 84 ft |
| Discharge Orientation | Top |
| Cord Length | Not Applicable |
| Media Temperature - Maximum | 212 deg F |
| Flow Rate (Maximum) | 95.2 gpm |
| Media Temperature - Minimum | -10 deg F |
| Hazardous Location Class | Not Rated |
| Discharge Diameter | 1-1/4 in |
| Discharge Rotation Increments | 0 deg |
| Number of Stages | 1 |
| Inlet Orientation | Top |
| Shaft Seal Material | Stainless Steel, Buna N, Carbon Rotary, Ceramic Stationary, Elastomer |
| Motor Frame Size | 56YZ |
| Pump Design | End Suction |
| Flow Rate @ 10 ft of Head - Maximum | Not Applicable |
| Flow Rate (Minimum) | 45.9 gpm |
| Volute Material | Cast Iron |
| Case Pressure - Maximum | 125 psi |
| Impeller Diameter | 5-15/16 in |
| Shaft Outer Diameter | Not Applicable |
| Thermal Overload Protection | No |
| Shut Off Pressure - Maximum | 75 psi |
| Inlet Position | Center |
| Wire Rope Length | 13 in |
| Fits Chest Size | Easy Accessible Vent, High Efficiency Impeller, Prime and Drain Connections |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |