Centrifugal Pump, Phase Three, Pump Housing Material Cast Iron, Horsepower 10 hp, Nameplate Voltage 240/480V AC, Flow Rate @ 40 ft of Head (Maximum) Not Applicable, Flow Rate @ 60 ft of Head (Maximum) 445 gpm, Flow Rate @ 80 ft of Head (Maximum) 380 gpm, Maximum Feet of Head 115 ft, Compatible Intake Pipe Size 4 in, Intake Type Flange, Compatible Discharge Pipe Size 3 in, Discharge Type Flange, Motor Enclosure Totally Enclosed Fan Cooled, Maximum Flow Rate 452.3 gpm
| Discharge Pump Type | Centrifugal Pump |
|---|---|
| HP - Pumps | 10 HP |
| Phase - Pumps | 3 |
| Voltage - Pumps | 240V AC, 480V AC |
| Max. Pressure - Pumps | 175 psi |
| Housing Material - Pumps | Cast Iron |
| Inlet Size - Pumps | 4 in (Flange) |
| Outlet Size - Pumps | 3 in (Flange) |
| Motor Enclosure - Pumps | Totally Enclosed Fan-Cooled |
| Best Efficiency Range GPM @ Head | 223.3 to 382.8 gpm @ 109.67 to 81.14 ft |
| Impeller Material | Bronze |
| Max. Liquid Temp. | 212 deg F |
| Duty | Continuous |
| Max. Head | 114 ft |
| Port Rotation | Top |
| Wetted Materials | Bronze, BUNA, Cast Iron, Ceramic |
| Length | 25.1 in |
| GPM of Water @ 110 Ft. of Head | 220 gpm |
| GPM of Water @ 100 Ft. of Head | 295.6 gpm |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Includes | Manual |
| Best Efficiency GPM @ PSI | 319 gpm @ 96 ft |
| Phase | Three |
| Frame | 215 JM |
| GPM of Water @ 60 Ft. of Head | 452.3 gpm |
| Item | Centrifugal Pump |
| GPM of Water @ 70 Ft. of Head | 421.7 gpm |
| Installation Position | Horizontal |
| Seal Material | 316 Stainless Steel, Buna Elastomer, Carbon, Ceramic |
| Max. Specific Gravity | 1 |
| Max. Case Pressure | 175 psi |
| Hz | 60 |
| GPM of Water @ 80 Ft. of Head | 387 gpm |
| Inlet Pressure | 2 psi |
| Agency Compliance | NSF 61 |
| GPM of Water @ 90 Ft. of Head | 346.5 gpm |
| Impeller Type | enclosed |
| Minimum Flow Rate | 220 gpm |
| Flow Rate @ 220 ft of Head (Maximum) | Not Applicable |
| Specific Gravity (Maximum) | 1 |
| Overall Height | 11.2 in |
| Seal Type | Type 21 |
| Motor Frame Designation | 215 JM |
| Flow Rate @ 100 ft of Head (Maximum) | 300 gpm |
| Flange or Union Included | Yes |
| Best Efficiency Flow | 319 gpm |
| Best Efficiency Head | 96 ft |
| Flow Rate @ 120 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
| Impeller Design | Closed |
| Flow Rate @ 200 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 40 ft of Head (Maximum) | Not Applicable |
| Wetted Material | Carbon, Stainless Steel, Ceramic, Buna N, Bronze |
| Intake Type | Flange |
| Shaft Material | Stainless Steel |
| Intake Size | 4 in |
| Features | Back Pull Out to Reduce Maintenance Down Time, Dynamic Balancing, Renewable Wear Rings |
| Flow Rate @ 280 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 180 ft of Head (Maximum) | Not Applicable |
| Priming | Manual |
| Flow Rate @ 30 ft of Head (Maximum) | Not Applicable |
| Pump Housing Material | Cast Iron |
| Mounting Orientation | Horizontal |
| Maximum Flow Rate | 452.3 gpm |
| Overall Length | 25.1 in |
| Flow Rate @ 80 ft of Head (Maximum) | 380 gpm |
| For Use With Potable Systems | Yes |
| Pumping Application | Booster Services |
| Flow Rate @ 300 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 90 ft of Head (Maximum) | 320 gpm |
| Flow Rate @ 60 ft of Head (Maximum) | 445 gpm |
| Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
| Discharge Type | Flange |
| Flow Rate @ 260 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 160 ft of Head (Maximum) | Not Applicable |
| Discharge Flange Size | 3 in |
| Frequency | 60 Hz |
| Overall Width | 9.7 in |
| Maximum Feet of Head | 115 ft |
| Duty Cycle | Continuous |
| Maximum Media Temperature | 212 deg F |
| Discharge Rotation | 90 Degrees Increments |
| Standards | ANSI 61, NSF Certified |
| Flow Rate @ 20 ft of Head (Maximum) | Not Applicable |
| Compatible Discharge Pipe Size | 3 in |
| Compatible Intake Pipe Size | 4 in |
| Flow Rate @ 15 ft of Head (Maximum) | Not Applicable |
| Horsepower | 10 |
| Compatible with Media Type | Water |
| Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 10 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 70 ft of Head (Maximum) | 420 gpm |
| Flow Rate @ 240 ft of Head (Maximum) | Not Applicable |
| Nameplate Voltage | 240/480V AC |
| Series | 3656 |
| Maximum RPM | 3,500 rpm |
| Shut Off Pressure (Maximum) | 175 psi |
| Flow Rate @ 140 ft of Head (Maximum) | Not Applicable |
| Feet of Head (Maximum) | 92 ft |
| Inlet Position | Offset |
| Media Temperature - Maximum | 212 deg F |
| Volute Material | Cast Iron |
| Thermal Overload Protection | Not Applicable |
| Discharge Standard | Flange |
| Shaft Seal Type | Mechanical |
| Discharge Position | Offset |
| Discharge Rotation Increments | 0 deg |
| Flow Rate (Maximum) | 452.3 gpm |
| Inlet Standard | Flange |
| Flow Rate @ 10 ft of Head - Maximum | Not Applicable |
| Inlet Orientation | Top |
| Shaft Seal Material | Stainless Steel, Carbon Rotary, Ceramic Stationary, Buna-N Elastomer |
| Viscosity (Maximum) | Not Applicable |
| Motor Speed - Maximum | 3,500 rpm |
| Discharge Gender | Not Applicable |
| Solid Diameter (Maximum) | 1/2 in |
| Number of Stages | 1 |
| Hazardous Location Class | Not Rated |
| Shut Off Pressure - Maximum | 175 psi |
| Case Pressure - Maximum | 125 psi |
| Discharge Orientation | Side |
| Cord Length | Not Applicable |
| Drive Coupling Type | No Coupling |
| Media Temperature - Minimum | -10 deg F |
| Shaft Outer Diameter | Not Applicable |
| Discharge Diameter | 3 in |
| Flow Rate (Minimum) | 220 gpm |
| Inlet Diameter | 4 in |
| Impeller Diameter | 4-11/16 in |
| Pump Design | End Suction |
| Chemical Compatibility | Water |
| Motor Frame Size | 215 JM |
| Wire Rope Length | 25.1 in |
| Fits Chest Size | Back Pull Out to Reduce Maintenance Down Time, Dynamic Balancing, Renewable Wear Rings |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |