Constant Pressure Booster System, 5 HP, Voltage 230, 1 Phase, Amps 10.9, 60 Hz, Motor RPM 3500, TEFC, Service Factor 1.15, Motor Ambient Temp. Rating 40 Degrees C, Housing Material Stainless Steel, Inlet 2 In., Outlet 1-1/2 In., Stages 3, Stainless Steel Wetted Materials, Stainless Steel Impeller Material, Closed Impeller Type, Carbon/Ceramic/Rubber Seal Material, Pressure Range 0 to 100 psi, Max. Liquid Temp. 250 Degrees F, Includes Pump Controller
| Includes - Constant Pressure Booster Pumps | Pump Controller |
|---|---|
| Item | Constant Pressure Booster Pump |
| HP - Pumps | 5 hp |
| Voltage - Pumps | 230V AC |
| Phase - Pumps | 1 |
| Inlet Size - Pumps | 2 in NPT |
| Outlet Size - Pumps | 1-1/2 in NPT |
| Number of Stages - Pumps | 3 |
| Max. Pressure - Pumps | 100 psi |
| Tank (Gal.) - Pumps | Tank Not Included |
| Housing Material - Pumps | 316 Stainless Steel |
| NEMA Rating - Pumps | 1 |
| Motor Enclosure - Pumps | Totally Enclosed Fan-Cooled |
| Max. PSI Boost @ 0-10 GPM | Not Rated |
| Max. Temp - Pumps | 250 deg F |
| Manufacturers Warranty Length | 1 yr |
| Stages | 3 |
| Impeller Material | Stainless Steel |
| Impeller Type | Closed |
| Wetted Materials | Stainless Steel |
| Housing Material | Stainless steel |
| Inlet | 2 in |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Motor RPM | 3,500 RPM |
| Amps | 10.9 A |
| HP | 5 |
| Motor Ambient Temp. Rating | 40 Degrees C |
| Installation Position | Horizontal |
| Max. Liquid Temp. | 250 deg F |
| Max. PSI Boost @ 20-30 GPM | 82 |
| Includes | Pump (e-HM 3 stg), Transducer |
| Outlet | 1-1/2" |
| Max. PSI Boost @ 10-20 GPM | Not Rated |
| Self-Priming | No |
| Duty - Pumps | Continuous |
| Max. Pressure | 100 psi |
| Hz | 60 Hz |
| Motor Type | AC |
| Seal Material | Carbon/EPR/Silicon Carbide |
| Voltage | 230V |
| Agency Compliance | CSA, UL, NSF |
| Duty | Continuous |
| Phase | Single |
| Item - Constant Pressure Booster Pumps | Constant Pressure Booster System |
| Seal Type | Mechanical |
| Series | e-AB2 |
| Discharge Flange Size | 1-1/2 in |
| Discharge Type | NPT |
| Motor Ambient Temperature (Maximum) | 104 deg F |
| Pump Housing Material | Stainless Steel |
| Maximum Media Temperature | 212 deg F |
| Duty Cycle | Continuous |
| Frequency | 60 Hz |
| Motor Ambient Temperature (Minimum) | 34 deg F |
| Pressure Boost (Maximum) | 82 psi |
| Compatible Discharge Pipe Size | 1-1/2 in |
| Maximum RPM | 3,500 rpm |
| Priming | Manual |
| Maximum Feet of Head | 205 ft |
| Includes Controller | Yes |
| Feet of Head (Minimum) | 20 ft |
| Compatible Intake Pipe Size | 2 in |
| Intake Type | NPT |
| Tank Type | Pressure Tank |
| Nameplate Voltage | 230V AC |
| Maximum Flow Rate | 100 gpm |
| Tank Capacity | Not Applicable |
| System Pressure (Maximum) | 100 psi |
| For Use With Potable Systems | No |
| Number of Stages | 3 |
| Compatible with Media Type | Water |
| Wetted Material | Stainless Steel |
| Pressure Boost (Minimum) | 50 psi |
| Thermal Overload Protection | Yes |
| Horsepower | 5 |
| Impeller Design | Closed |
| Pumping Application | Filtration Systems, Fire Suppression Systems, Irrigation Systems, Multibath Homes |
| Standards | CE Certified, cULus Listed |
| Manufacturer Warranty Length | 3 yr |
| Minimum Flow Rate | 60 gpm |
| Inlet Standard | NPT |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Pressure Boost - Maximum | 82 psi |
| Revolutions Per Minute - Maximum | 3,500 rpm |
| Media Temperature - Maximum | 212 deg F |
| Discharge Standard | NPT |
| Full Load Current | 10.9 A |
| Pump Casing Material | Stainless Steel |
| Flow Rate - Maximum | 100 gpm |
| Pressure Boost - Minimum | 50 psi |
| Discharge Diameter | 1-1/2 in |
| Feet of Head - Minimum | 20 ft |
| Shut Off Pressure - Maximum | 100 psi |
| Feet of Head - Maximum | 205 ft |
| Motor Ambient Temperature - Maximum | 104 deg F |
| Flow Rate - Minimum | 60 gpm |
| Motor Ambient Temperature - Minimum | 34 deg F |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |