Sewage Ejector Pump, HP 3, Rated Voltage 230V AC, Phase - Pumps 1, Amps 21.50 A, Motor Type Permanent Split Capacitor, Body Material Cast Iron, Impeller Material Cast Iron, Shaft Seal Material - Pumps Silicone Carbide, Switch Actuation No Switch Included, Switch Electrical Connection No Switch Included, On Point Not Applicable, Off Point Not Applicable, Flow Rate @ 20 Ft. of Head 440 gpm, Flow Rate @ 40 Ft. of Head 75 gpm, Max. Diameter Solids 3 in, Body Dia. 15 3/4 in
| HP | 3 |
|---|---|
| Phase - Pumps | 1 |
| Switch Actuation | No Switch Included |
| Body Material | Cast Iron |
| Base Material | Cast Iron |
| Max. Head | 46 ft |
| Impeller Material | Cast Iron |
| Max. Diameter Solids | 3 in |
| Voltage | 230V |
| Max. Liquid Temp. | 104 Degrees F (Continuous), 140 Degrees F (Intermittent) |
| Agency Compliance | CSA Certified, UL Listed |
| Diameter | 15-3/4 in |
| Shaft Seal | Silicon Carbide |
| Bearing Type | Ball |
| Max. Head - Pumps | 46 ft |
| Shaft Seal Material - Pumps | Silicone Carbide |
| Motor Type | Permanent Split Capacitor |
| Voltage - Pumps | 240V AC |
| Height | 28-1/4 in |
| Pump Body Material | Cast Iron |
| Motor RPM | 1,750 |
| Cord Length | 20 ft |
| Max. Dia. Solids | 3 in |
| GPM of Water @ 25 Ft. of Head | 370 |
| Phase | Single |
| Housing Material | Cast Iron |
| Discharge NPT | 4 in |
| Amps | 21.5 |
| Input Phase AC | 1 |
| Item - Sewage Pumps | Submersible Sewage Pump |
| Impeller Material - Pumps | Cast Iron |
| Amps - Pumps | 21.5 |
| GPM of Water @ 20 Ft. of Head | 440 |
| Switch Type - Pumps | No Switch Included |
| Pump Type | Manual |
| GPM of Water @ 40 Ft. of Head | 75 |
| Switch Type | None |
| GPM of Water @ 30 Ft. of Head | 225 |
| Cord Length - Pumps | 20 ft |
| Thermal Protection | Yes |
| Item | Sewage Ejector Pump |
| Manufacturers Warranty Length | 1 yr |
| Discharge | 4 in (Flanged) |
| Body Dia. | 15-3/4 in |
| Switch Electrical Connection | No Switch Included |
| RPM | 1,750 |
| On Point | Not Applicable |
| Discharge Dia. | 4 in |
| Flow Rate @ 40 Ft. of Head | 75 gpm |
| Discharge Standard | Flanged |
| Flow Rate @ 20 Ft. of Head | 440 gpm |
| Off Point | Not Applicable |
| Overall Height | 28-1/4 in |
| Rated Voltage | 230V AC |
| Duty Cycle | Continuous |
| Type | Manual |
| Current | 21.5 A |
| Alert Messaging | Not Applicable |
| Body Diameter | 15-3/4 in |
| Width at Widest Point | 15-1/2 in |
| Frequency | 60 Hz |
| Discharge Orientation | Vertical |
| Shaft Seal Material | Silicon |
| Alert Output | Not Applicable |
| Control Panel Functions | Not Applicable |
| Alerts Indicated | Not Applicable |
| Solids Diameter - Maximum | 3 in |
| Series | WS-D3 |
| Discharge Gender | Female |
| Discharge Diameter | 4 in |
| Volute Material | Cast Iron |
| Connectivity | Not Applicable |
| Shaft Seal Type | Single Mechanical |
| For Media Type | Sewage Water |
| Feet of Head - Maximum | 46 ft |
| Power Source | Corded Electric |
| Rotation Speed - Maximum | 1,750 rpm |
| Standards | CSA Certified, UL Listed |
| Flow Rate @ 10 ft of Head | 550 gpm |
| Motor Housing Material | Cast Iron |
| Liquid Temperature - Maximum | 104 deg F |
| Horsepower | 3 |
| Requires Control Panel | Control Panel Required |
| Power Source - TS Only | Corded Electric |
| Power Source - old | Corded Electric |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |