Centrifugal Pump, Phase Three, Pump Housing Material Cast Iron, Horsepower 3 hp, Nameplate Voltage 208-230/460V AC, Flow Rate @ 60 ft of Head (Maximum) 65 gpm, Flow Rate @ 80 ft of Head (Maximum) 55 gpm, Maximum Feet of Head 142 ft, Compatible Intake Pipe Size 1 1/4 in, Intake Type NPT, Compatible Discharge Pipe Size 1 in, Discharge Type NPT, Motor Enclosure Open Dripproof, Maximum Flow Rate 63 gpm, Flow Rate @ 100 ft of Head (Maximum) 46 gpm, Flow Rate @ 120 ft of Head (Maximum) 34 gpm
| HP - Pumps | 3 hp |
|---|---|
| Voltage - Pumps | 208V AC to 240V AC, 480V AC |
| Phase - Pumps | 3 |
| Housing Material - Pumps | Stainless Steel |
| Inlet Size - Pumps | 1-1/4 in NPT |
| Outlet Size - Pumps | 1 in NPT |
| Max. Head | 142 ft |
| Motor Enclosure - Pumps | Open Dripproof |
| Wetted Materials | 303/316L Stainless Steel, Carbon, Ceramic, Buna-N |
| Outlet | 1" |
| GPM of Water @ 110 Ft. of Head | 40 |
| Min. GPM @ Head | 10 @ 140 ft |
| Max. Specific Gravity | 1 |
| Frame | 48 |
| Max. GPM @ Head | 63 @ 60 ft |
| Amps | 9.0/4.5 |
| Inlet | 1-1/4" |
| Manufacturers Warranty Length | 1 yr |
| Seal Material | 316 Stainless Steel, Buna-N, Carbon, Ceramic |
| Item - Straight Centrifugal Pumps | Straight Centrifugal High Head Pump |
| Motor Enclosure | Open Drip Proof |
| Max. Liquid Temp. | 212 deg F |
| GPM of Water @ 100 Ft. of Head | 46 |
| GPM of Water @ 120 Ft. of Head | 34 |
| GPM of Water @ 130 Ft. of Head | 26 |
| Impeller Type | Closed |
| Max. Case Pressure | 75 psi |
| GPM of Water @ 60 Ft. of Head | 63 |
| Item | Centrifugal Pump |
| Housing Material | Stainless Steel |
| GPM of Water @ 80 Ft. of Head | 55 |
| Voltage | 208V AC to 230V AC, 460V AC |
| Best Efficiency GPM @ Head | 38 @ 120 ft |
| Port Rotation | 45 increments |
| GPM of Water @ 70 Ft. of Head | 59 |
| GPM of Water @ 140 Ft. of Head | 10 |
| Max. Dia. Solids | 1/16 in |
| Motor RPM | 3,500 RPM |
| Phase | Three |
| Best Efficiency Range GPM @ Head | 32 to 44 gpm @ 126 to 106 ft |
| Inlet Pressure | 50 psi |
| Motor Type | 3-Phase |
| HP | 3 |
| Impeller Material | Stainless Steel |
| Hz | 60 Hz |
| GPM of Water @ 90 Ft. of Head | 51 |
| Duty | Continuous |
| Specific Gravity (Maximum) | 1 |
| Horsepower | 3 |
| Flow Rate @ 260 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 240 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 90 ft of Head (Maximum) | 51 gpm |
| Flow Rate @ 100 ft of Head (Maximum) | 46 gpm |
| Flow Rate @ 160 ft of Head (Maximum) | Not Applicable |
| Pump Housing Material | Cast Iron |
| Compatible Intake Pipe Size | 1-1/4 in |
| Flow Rate @ 15 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 10 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 70 ft of Head (Maximum) | 59 gpm |
| Duty Cycle | Continuous |
| Flow Rate @ 180 ft of Head (Maximum) | Not Applicable |
| Maximum RPM | 3,500 rpm |
| Compatible Discharge Pipe Size | 1 in |
| Flow Rate @ 200 ft of Head (Maximum) | Not Applicable |
| Discharge Rotation | 45 Degrees Increments |
| Flow Rate @ 80 ft of Head (Maximum) | 55 gpm |
| Best Efficiency Flow | 42 gpm |
| Flow Rate @ 120 ft of Head (Maximum) | 34 gpm |
| Wetted Material | Ceramic, Carbon, Buna N, 303 Stainless Steel, 316L Stainless Steel |
| For Use With Potable Systems | No |
| Flow Rate @ 30 ft of Head (Maximum) | Not Applicable |
| Seal Type | Type 6 |
| Maximum Media Temperature | 212 deg F |
| Flow Rate @ 60 ft of Head (Maximum) | 65 gpm |
| Discharge Type | NPT |
| Maximum Feet of Head | 142 ft |
| Flow Rate @ 40 ft of Head (Maximum) | Not Applicable |
| Solid Diameter (Maximum) | 0.13 in |
| Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 280 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 300 ft of Head (Maximum) | Not Applicable |
| Priming | Manual |
| Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
| Maximum Flow Rate | 63 gpm |
| Motor Frame Designation | 48 |
| Frequency | 60 Hz |
| Compatible with Media Type | Water |
| Impeller Design | Closed |
| Nameplate Voltage | 208-230/460V AC |
| Flow Rate @ 140 ft of Head (Maximum) | 10 gpm |
| Shaft Material | Stainless Steel |
| Best Efficiency Head | 108 ft |
| Flow Rate @ 220 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 20 ft of Head (Maximum) | Not Applicable |
| Intake Type | NPT |
| Volute Material | Cast Iron |
| Shaft Seal Material | 316 Stainless Steel, Carbon, Ceramic, Buna N |
| Discharge Position | Center |
| Feet of Head (Maximum) | 156 ft |
| Flow Rate (Maximum) | 156 gpm |
| Motor Speed - Maximum | 3,500 rpm |
| Shut Off Pressure - Maximum | 75 psi |
| Thermal Overload Protection | No |
| Flow Rate @ 10 ft of Head - Maximum | 72 gpm |
| Discharge Orientation | Top |
| Discharge Diameter | 1 in |
| Impeller Diameter | 6-1/8 in |
| Media Temperature - Maximum | 212 deg F |
| Hazardous Location Class | Not Rated |
| Chemical Compatibility | Water |
| Case Pressure - Maximum | 125 psi |
| Mounting Orientation | Horizontal |
| Inlet Orientation | Top |
| Discharge Rotation Increments | 0 deg |
| Drive Coupling Type | No Coupling |
| Media Temperature - Minimum | -10 deg F |
| Shaft Outer Diameter | Not Applicable |
| Pump Design | End Suction |
| Number of Stages | 1 |
| Pumping Application | Booster Services |
| Shaft Seal Type | Mechanical |
| Viscosity (Maximum) | Not Applicable |
| Cord Length | Not Applicable |
| Inlet Diameter | 1-1/4 in |
| Inlet Position | Center |
| Standards | Not Applicable |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |