Goodman - 2.5 Ton Cooling - 80k BTU/Hr Heating - Heat Pump + Furnace System - 14.3 SEER2 - 80% AFUE - Upflow

The Goodman GSZB403010 GM9S800805CX CAPTA3026C4 Bundle System

The Goodman bundle system includes a GSZB403010 heat pump, GM9S800805CX gas furnace, and CAPTA3026C4 evaporator coil. This system is designed for ease of installation and consistent durability, offering both immediate and long-term value. The heat pump, furnace, and evaporator coil work together to provide a complete home comfort solution. Each component plays an essential role in delivering a combined cooling and heating capacity, regulated by advanced technology for optimal performance.

2.5 ton cooling capacity
80,000 BTU heating capacity
14.3 SEER2 rating
80% AFUE
Efficient heat transfer with aluminized-steel tubular heat exchanger
The Goodman GSZB403010 Heat Pump

The GSZB403010 is a single-stage, 2.5-ton heat pump designed to provide efficient cooling and heating. With an energy-efficient compressor, this unit ensures reliable refrigerant flow and uses Smartshift™ technology for smooth transitions during defrost mode. The copper tube and aluminum fin coil maximizes heat transfer, contributing to its 14.3 SEER2 and 7.5 HSPF2 ratings.

Energy-efficient compressor
Smartshift™ technology for quiet defrost transitions
Copper tube and enhanced aluminum fin coil
Factory-installed compressor crankcase heater
The Goodman GM9S800805CX Gas Furnace

The GM9S800805CX gas furnace offers 80,000 BTU heating capacity with an 80% AFUE rating. The furnace features a multi-speed ECM blower motor for precise temperature control and low utility bills. The aluminized-steel tubular heat exchanger ensures efficient heat transfer, while the self-diagnostic control board continuously monitors system operation for reliability.

Aluminized-steel tubular heat exchanger
Multi-speed ECM blower motor
Self-diagnostic control board
Quiet operation with selected blower and gas valve components
The CAPTA3026C4 Cased Evaporator Coil

The CAPTA3026C4 is a 2.5-ton evaporator coil designed for upflow/downflow installation. Its all-aluminum design with sine fins and grooved tubes maximizes surface area for efficient heat transfer. The factory-installed internal thermostatic expansion valve maintains ideal refrigerant flow, and condensate management features keep the coil safe and operational.

All-aluminum design with sine fins and grooved tubes
Internal thermostatic expansion valve
Condensate management with rust-resistant thermoplastic drain pan
21-inch cabinet width


The Goodman GSZB403010 GM9S800805CX CAPTA3026C4 Bundle SystemThe Goodman bundle system includes a GSZB403010 heat pump, GM9S800805CX gas furnace, and CAPTA3026C4 evaporator coil. This system is designed for ease of installation and consistent durability, offering both immediate and long-term value. The heat pump, furnace, and evaporator coil work together to provide a complete home comfort solution. Each component plays an essential role in delivering a combined cooling and heating capacity, regulated by advanced technology for optimal performance.2.5 ton cooling capacity80,000 BTU heating capacity14.3 SEER2 rating80% AFUEEfficient heat transfer with aluminized-steel tubular heat exchangerThe Goodman GSZB403010 Heat PumpThe GSZB403010 is a single-stage, 2.5-ton heat pump designed to provide efficient cooling and heating. With an energy-efficient compressor, this unit ensures reliable refrigerant flow and uses Smartshift™ technology for smooth transitions during defrost mode. The copper tube and aluminum fin coil maximizes heat transfer, contributing to its 14.3 SEER2 and 7.5 HSPF2 ratings.Energy-efficient compressorSmartshift™ technology for quiet defrost transitionsCopper tube and enhanced aluminum fin coilFactory-installed compressor crankcase heaterThe Goodman GM9S800805CX Gas FurnaceThe GM9S800805CX gas furnace offers 80,000 BTU heating capacity with an 80% AFUE rating. The furnace features a multi-speed ECM blower motor for precise temperature control and low utility bills. The aluminized-steel tubular heat exchanger ensures efficient heat transfer, while the self-diagnostic control board continuously monitors system operation for reliability.Aluminized-steel tubular heat exchangerMulti-speed ECM blower motorSelf-diagnostic control boardQuiet operation with selected blower and gas valve componentsThe CAPTA3026C4 Cased Evaporator CoilThe CAPTA3026C4 is a 2.5-ton evaporator coil designed for upflow/downflow installation. Its all-aluminum design with sine fins and grooved tubes maximizes surface area for efficient heat transfer. The factory-installed internal thermostatic expansion valve maintains ideal refrigerant flow, and condensate management features keep the coil safe and operational.All-aluminum design with sine fins and grooved tubesInternal thermostatic expansion valveCondensate management with rust-resistant thermoplastic drain pan21-inch cabinet width


Goodman - 2.5 Ton Cooling - 80k BTU/Hr Heating - Heat Pump + Furnace System - 14.3 SEER2 - 80% AFUE - UpflowBundle Includes - Qty 1: GSZB403010 and Qty 1: GM9S800805CX and Qty 1: CAPTA3026C4Which is: Goodman GSZB4 Split Heat Pump 14.3 SEER2 & HSPF, Single Stage, 2.5 Ton, and a Goodman 80% AFUE GM9S80 Gas Furnace Multi Speed ECM, Single Stage, Upflow/Horizontal, 80000 Btu BTUH/H, and a CAPTA AlumaFin7™ Cased Aluminum Evaporator Coil, Upflow/Downflow, 2.0-2.5 Ton, 21 in Cabinet with Orifice Expansion Device
Vendor: GOODMAN
Vendor Raw: GOODMAN
Product Type: Split Heat Pump System Furnace
Category: Online HVAC Supply
Subcategory: Residential Heating Systems
Subchildcategory: Split Heating & Air Conditioning Units
Availability Text: Out Of Stock
Tags: 14.3 SEER2, 2.5 Ton, 80% AFUE, 80000 BTU, Bundle, final-sale, fr-ship, free-ship, goodman-central-ac-systems, goodman-june24, goodman_spring2024_15, GSZB, Heating and Cooling, LTL, Single Stage, Upflow
Source file: GSZB403010 GM9S800805CX CAPTA3026C4 - goodman-2-5-ton-cooling-80k-btu-hr-heating-heat-pump-furnace-system-14-3-seer2-80-afue-upflow-8.json.json