Jobber Length Drill Bit, Drill Bit Size 6.2 mm, Drill Bit Point Angle 118 Degrees , Carbide Tipped, Bright (Uncoated), Decimal Equivalent 0.244, Metric, Drill Bit Point Type Conventional Point, Non-Coolant Through
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 4 in |
| Drill Bit Point Angle | 118 deg |
| Drill Bit Size | 6.2 mm |
| Number of Flutes | 2 |
| Shank Dia. | 6.2 mm |
| Material - Machining | Carbide Tipped |
| Cutting Direction | Right Hand |
| Finish - Machining | Bright |
| Shank Type - Machining | Straight |
| Flute Length | 2-3/4 in |
| Primary Material Application ISO Code | P, K, M |
| Drill Length Class | Jobber-Length |
| Flute Type | Spiral |
| Standards | Not Rated |
| Maximum Drilling Depth | 2-3/4 in |
| Drill Bit Point Type | Conventional Point |
| List Number | 0910 |
| Depth:Dia. Ratio | 3 xD |
| Spiral Direction | Right Hand |
| Measurement System | Metric |
| Primary Material Application | Brass, Bronze, Copper, Cast Iron, Aluminum, Stainless Steel, Steel, Titanium, Nickel |
| Decimal Equivalent | 0.244 |
| Coolant Fed | Non-Coolant Through |
| Material Grade - Machining | General Purpose |
| Helix Angle - Minimum | 27 deg |
| Drill Diameter Tolerance | H8 |
| Secondary Material Application | Aluminum, Brass, Bronze, Composite, Copper, Nickel, Stainless Steel, Steel, Titanium |
| Helix Angle - Maximum | 30 deg |
| Secondary Material Application ISO Code | M, P, K |
| Wire Rope Length | 4 in |
| Length | 4 in |
| Country of Origin (subject to change) | Spain |
| Package Quantity | 1 |