DC Washdown Motor,1/4 HP,1750,56C,90V
| Item | DC Washdown Motor |
|---|---|
| HP | 1/4 |
| Voltage | 90 V DC |
| Nameplate RPM | 1,750 RPM |
| Shaft Dia. | 5/8 in |
| Frame | 56C |
| Full Load Amps | 2.7 A |
| Phase | Single |
| RPM Range | 1,701-1,800 |
| Motor Thermal Protection | None |
| Motor Design | Permanent Magnet |
| Length Less Shaft | 8-11/16 in |
| Motor Enclosure Design | Totally Enclosed Nonventilated |
| Voltage Compatibility | 90 V DC |
| Motor Application | Washdown |
| Max. Ambient Temp. | 40 deg C |
| Motor Mounting Type | Face/Base |
| Overall Length | 10-5/8 in |
| Shaft Length | 2-1/16 in |
| Rotation | CW/CCW |
| Ins. Class | F |
| Body Dia. | 5.63 in |
| Standards | CE, CSA, UL |
| Motor Service Factor | 1 |
| Motor Bearings | Ball |
| Shaft Material | Stainless Steel |
| Usable @ 200V | No |
| Duty Cycle | Continuous |
| Nominal Efficiency | 68% |
| Finish | White Epoxy Paint |
| Weight | 26 lb |
| Endshield Material | Stainless Steel |
| Conduit Box Location | Exterior |
| Bolt Circle Dia. | 5-7/8 in |
| No. of Speeds | 1 |
| Manufacturers Warranty Length | 1 yr |
| Usable @ 208V | No |
| Motor Shaft Rotation | CCW, CW |
| Conduit Box Position | F3 |
| Series | Washguard |
| Shaft Diameter | 5/8 in |
| Frame Finish | Epoxy-Coated |
| Bolt Circle Diameter | 5-7/8 in |
| Nameplate Service Factor | 1 |
| Nameplate Voltage | 90 V DC |
| Frame Size | 56C |
| Manufacturers Warranty | 1 yr |
| Product Type | Motor |
| Number of Speeds | 1 |
| Ambient Temperature - Maximum | 40 deg C |
| Application | Washdown |
| Body Diameter | 5.63 in |
| Motor Enclosure Type | Totally Enclosed Non-Ventilated |
| Full Load Current | 2.7 A |
| Insulation Class | F |
| Wire Rope Length | 10-5/8 in |
| Length | 10-5/8 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |