Motor de ventilador de transmisión directa, monofásico, diseño de motor capacitor de arranque permanente, 1/3 hp HP, RPM de placa 1,075 RPM, número de velocidades 3, voltaje 277V AC, 2.6 A de corriente a plena carga, marco 48Y, vatios de salida 250 W, 60 Hz Hz, utilizable a 208V No utilizable a 208V, factor de servicio del motor 1, protección térmica del motor automática, clase de aislamiento B, ciclo de trabajo continuo, temperatura ambiente máxima 40 grados C, rotación del eje del motor CW/CCW, diseño de carcasa del motor abierta con ventilación sobre el motor, tipo de montaje del motor base de cuna, material del marco del motor acero
| HP | 1/3 |
|---|---|
| Nameplate RPM | 1,075 |
| Voltage | 277V AC |
| Frame | 48 Y |
| Shaft Dia. | 1/2 in |
| Shaft Length | 4-1/16 in |
| Motor Shaft Rotation | CCW, CW |
| RPM Range | 1,001 to 1,100 |
| Motor Shaft Design | Keyed |
| Nominal Efficiency | 65% |
| Motor Thermal Protection | Auto |
| No. of Speeds | 3 |
| Voltage Compatibility | 277V AC |
| Motor Application | Blower; Fan |
| Motor Mounting Type | Resilient Base |
| Motor Mounting Position | Horizontal |
| Motor Enclosure Design | Open Air-Over |
| Full Load Amps | 2.6 A |
| Motor Bearings | Ball |
| Body Dia. | 5-5/8 in |
| Motor Service Factor | 1 |
| Item | Direct Drive Blower Motor |
| Motor Design | Permanent Split Capacitor |
| Phase | Single |
| Capacitor Required | Capacitor Included |
| Ins. Class | B |
| Standards | CSA Certified, UL Listed |
| Overall Length | 9-3/4 in |
| Duty | Continuous |
| Hz | 60 |
| Length Less Shaft | 5-11/16 in |
| Max. Ambient Temp. | 40 deg C |
| Insulation Class | B |
| Weight | 15 lb |
| Product Type | Blower Motor, Fan |
| Bearing Type | Ball |
| Usable @ 208V | Not Usable at 208V |
| Nameplate Service Factor @ 60 Hz | 1 |
| Frame Material | Steel |
| Full Load Current @ 60 Hz | 2.6 A |
| Frame Size | 48Y |
| Frequency | 60 Hz |
| Shaft Diameter | 1/2 in |
| Sub Application | General Purpose |
| Wattage | 250 W |
| Motor Enclosure Type | Open Air Over |
| Stack Size | Not Applicable |
| Application | Fan, Blower |
| Body Diameter | 5.6 in |
| Drive Type | Direct Drive |
| Shaft Design | Keyed |
| Mounting Position | Horizontal |
| Nameplate Voltage @ 50 Hz | Not Applicable |
| Number of Speeds | 3 |
| Ambient Temperature - Maximum | 40 deg C |
| Wire Rope Length | 9-3/4 in |
| Length | 9-3/4 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |