Hazardous Location Motor, Single Phase, Motor Design Capacitor-Start, 1/3 hp HP, Nameplate RPM 1,140 RPM, No. of Speeds 1, Voltage 115/208-230V AC, Full Load Amps 7.8/3.6-3.9 A, 56 Frame, Usable @ 208V Usable at 208V, Usable @ 200V Not Usable at 200V, Hz 60 Hz, Max. Ambient Temp. 40 Degrees C, Motor Service Factor 1, Motor Thermal Protection Auto, Ins. Class B, Hazardous Location Class Class I, Class II, Temp. Code T3B, Motor Enclosure Design Totally Enclosed Fan Cooled, Duty Cycle Continuous
| Motor Design | Capacitor-Start |
|---|---|
| Phase | Single |
| HP | 1/3 hp |
| RPM Range | 1,101-1,200 |
| Voltage | 115V AC, 208V AC to 230V AC |
| Frame | 56 |
| Hazardous Location Class | Class I, Class II |
| Motor Thermal Protection | Auto |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Mounting Type | Rigid Base |
| Nominal Efficiency | 52.5% |
| Shaft Dia. | 5/8 in |
| Motor Service Factor | 1 |
| Duty | Continuous |
| Overall Length | 13-15/16 in |
| Voltage Compatibility | 115V AC, 200V AC to 230V AC, 115V AC, 208V AC to 230V AC, 115V AC, 208V AC to 230V AC |
| Item | Hazardous Location Motor |
| Motor Frame Material | Steel |
| Full Load Amps | 7.8/3.6-3.9 A |
| Temp. Code | T3B |
| Max. Ambient Temp. | 40 deg C |
| Motor Bearings | Ball |
| Motor Application | Hazardous Location |
| Lead Length | 8 in |
| Hz | 60 |
| Ins. Class | B |
| Shaft Length | 1-7/8 in |
| NEMA Design | None |
| Standards | CSA Certified, UL Listed |
| Frame Material | steel |
| Nameplate RPM | 1,140 RPM |
| Motor Shaft Design | Keyed |
| Motor Efficiency Group | Standard Efficient |
| Includes | Explosion Proof Conduit Box |
| Motor Shaft Rotation | CCW, CW |
| Length Less Shaft | 11-15/16 in |
| Motor Mounting Position | Horizontal |
| Usable @ 208V | Usable at 208V |
| Usable @ 200V | Not Usable at 200V |
| Duty Cycle | Continuous |
| Weight | 2,055 lb |
| No. of Speeds | 1 |
| Hazardous Location Division | Division I |
| Conduit Box Location | Exterior |
| Hazardous Location Group | Group C, Group D, Group F, Group G |
| Motor Sub Application | Not Applicable |
| RPM @ 50Hz | Not Applicable |
| Duty Ratio | Not Applicable |
| Maximum Run Time | Not Applicable |
| Service Factor @ 50Hz | Not Applicable |
| Voltage @ 50Hz | Not Applicable |
| Full Load Amps @ 50Hz | Not Applicable |
| HP @ 50Hz | Not Applicable |
| Frequency | 60 Hz |
| Efficiency Rating | Standard Efficiency |
| Sub Application | Not Applicable |
| Bearing Type | Ball |
| Full Load Current @ 50 Hz | Not Applicable |
| Mounting Position | Horizontal |
| Product Type | Hazardous Location Motor |
| Motor Enclosure Type | Totally Enclosed Fan Cooled |
| Shaft Diameter | 5/8 in |
| Application | Hazardous Location |
| Frame Size | 56 |
| Number of Speeds | 1 |
| Nameplate Voltage @ 50 Hz | Not Applicable |
| Nameplate Service Factor @ 60 Hz | 1 |
| Nameplate Service Factor @ 50 Hz | Not Applicable |
| Insulation Class | B |
| Shaft Design | Keyed |
| Ambient Temperature - Maximum | 40 deg C |
| Nameplate RPM @ 50 Hz | Not Applicable |
| Full Load Current @ 60 Hz | 7.8/3.6-3.9 A |
| Temperature Code | T3B |
| Run Time - Maximum | Not Applicable |
| Nameplate Horsepower @ 50 Hz | Not Applicable |
| Wire Rope Length | 13-15/16 in |
| Length | 13-15/16 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |