| Number of Outlets | 1 |
|---|---|
| Features | Connector "Hood" Closure Cap Seals Device When Not in Use, Interlocking "Tongue and Groove" Construction Seals Out Water, Moisture, and Dirt When Plugs are Mated with Connectors, Multi-Point Sealing System Utilizes Nut, Strain Relief Washer, and Rubber Bushing to Form a Watertight Cord Grip Seal, Non-Magnetic Stainless Steel Fast-Threading Assembly Screws Won't Interfere with Sensitive Equipment, Plug and Connector Husk is Molded to a Bondable Nylon Body, Providing a Device that Withstands Physical Abuse |
| Series | Insulgrip |
| Midget Locking | No |
| Market | Industrial |
| Flange Diameter | Not Applicable |
| Flange Material | Not Applicable |
| Wire Connection Type | Screw Terminals |
| Shrouded | Yes |
| Flange Type | Non-Flanged |
| Number of Poles | 2 |
| Standards | ANSI C-73, CSA C22.2 No. 42, CSA File No. LR-406, NEMA WD-6, NOM 057, UL 498 File No. E13399, UL Fed. Spec. W-C-596, UL File No. E13399 |
| Flange Shape | Not Applicable |
| Hub Type | Dead End |
| For Minimum Cable Diameter | Not Applicable |
| Horsepower Rating | 0.5 HP |
| Minimum Wire Size | 18 AWG |
| NEMA Receptacle Configuration | L6-15R |
| Item | Locking Receptacle |
| For Environment | Corrosive |
| Number of Wires | 3 |
| Grounding | Grounded |
| Maximum Wire Size | 10 AWG |
| Face Plate Height | 4.06 in |
| Housing Color | Yellow |
| Resistance Properties | Moisture Resistant |
| Minimum Operating Temperature | -40 deg C |
| Mount Hole Center-to-Center Height | 3-3/4 in |
| UL 94 Flammability Rating | V-0 |
| Current Rating | 15 A |
| Flange Height | Not Applicable |
| Number of Gangs | 1 |
| Maximum Operating Temperature | 60 deg C |
| IP Rating | Not Rated |
| Voltage Rating | 250V AC |
| Housing Material | Nylon |
| Flange Width | Not Applicable |
| For Maximum Cable Diameter | Not Applicable |
| Phase | Single |
| Mount Type | Flush |
| Contact Material | Nickel-Plated Brass |
| Cover Type | No Cover |
| Connection Orientation | Straight |
| NEMA Enclosure Rating | Not Rated |
| Fits Chest Size | Connector "Hood" Closure Cap Seals Device When Not in Use, Interlocking "Tongue and Groove" Construction Seals Out Water, Moisture, and Dirt When Plugs are Mated with Connectors, Multi-Point Sealing System Utilizes Nut, Strain Relief Washer, and Rubber Bushing to Form a Watertight Cord Grip Seal, Non-Magnetic Stainless Steel Fast-Threading Assembly Screws Won't Interfere with Sensitive Equipment, Plug and Connector Husk is Molded to a Bondable Nylon Body, Providing a Device that Withstands Physical Abuse |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |