Submersible Sump Pump, HP 1/2, Phase - Pumps 1, Rated Voltage 115V AC, Hz 60 Hz, Amps 7.3 A, Switch Actuation No Switch Included, Switch Electrical Connection No Switch Included, Body Material Aluminum, Impeller Material Engineered Polymer, Shaft Seal Material - Pumps Nitrile Rubber, Flow Rate @ 5 Ft. of Head 48.0 gpm, Flow Rate @ 10 Ft. of Head 44 gpm, Flow Rate @ 15 Ft. of Head 38.0 gpm, Flow Rate @ 20 Ft. of Head 32.0 gpm, Max. Head 34 ft, Min. Sump Pit Dia. 14 in, Minimum Water Depth 14 in
| Cord Length | 10 ft |
|---|---|
| Discharge NPT | 1-1/2" |
| HP | 1/2 |
| Hz | 60 Hz |
| Impeller Material | Engineered Polymer |
| Max. Head | 34 ft |
| Motor RPM | 3,450 |
| Motor Type | Shaded pole |
| Voltage | 115 V |
| Phase | Single |
| High Temp. Rated Thermal Overload | Yes |
| Duty | Continuous |
| High Temp. Rated Impeller | Yes |
| GPM of Water @ 15 Ft. of Head | 38 |
| Handle | Yes |
| Thermal Protection | Yes |
| Input Phase AC | 1 |
| Voltage - Pumps | 115 V AC |
| Width | 7-1/8 in |
| Pump RPM | 3,450 |
| Max. Diameter Solids | 3/8 in |
| Item | Submersible Sump Pump |
| Agency Compliance | CSA, cUL |
| Impeller Material - Pumps | Engineered Thermoplastic |
| High Temp. Rated Power Cord | Yes |
| Bearing Type | Ball |
| Outlet | 1-1/2" FNPT |
| High Temp. Rated Switch | No |
| Cord Length - Pumps | 10 ft |
| Manufacturers Warranty Length | 3 yr |
| Alarm Included | No |
| GPM of Water @ 10 Ft. of Head | 44 |
| GPM of Water @ 5 Ft. of Head | 48 |
| GPM of Water @ 20 Ft. of Head | 32 |
| Pump Body Material | Aluminum |
| Min. Sump Pit Dia. | 14 in |
| Max. Liquid Temp. | 180 deg F |
| Item - Sump Pumps | Submersible Sump Pump |
| Base Material | Aluminum |
| Shaft Seal Material - Pumps | Nitrile Rubber |
| GPM of Water @ 25 Ft. of Head | 22 |
| Length | 9-39/64 in |
| Max. Head - Pumps | 34 ft |
| NEC Cord Designation | SJEOOW |
| GPM of Water @ 30 Ft. of Head | 10 |
| Switch Type - Pumps | Manual |
| Height | 12-13/32 in |
| Amps - Pumps | 7.3 |
| Gauge/Conductor | 5.3333 |
| Pump HP | 0.5 |
| Application | Dewatering |
| Amps | 7.3 |
| Switch Actuation | No Switch Included |
| Overall Height | 11-1/4 in |
| Flow Rate @ 10 Ft. of Head | 44 gpm |
| Rated Voltage | 115 V AC |
| Discharge Dia. | 1-1/2 in |
| Body Material | Aluminum |
| Duty Cycle | Continuous |
| Phase - Pumps | 1 |
| Flow Rate @ 5 Ft. of Head | 48 gpm |
| Discharge | 1-1/2 in FNPT |
| Discharge Gender | Female |
| Discharge Standard | NPT |
| Minimum Water Depth | 14 in |
| Width at Widest Point | 7-1/8 in |
| Flow Rate @ 20 Ft. of Head | 32 gpm |
| RPM | 3,450 |
| Switch Electrical Connection | No Switch Included |
| Flow Rate @ 15 Ft. of Head | 38 gpm |
| Discharge Diameter | 1-1/2 in |
| Connectivity | Not Applicable |
| Flow Rate @ 10 ft of Head | 53 gpm |
| Motor Housing Material | Aluminum |
| Flow Rate @ 30 ft of Head | 10 gpm |
| Operation | Manual |
| For Media Type | Clear Water |
| Shaft Seal Material | Nitrile Rubber |
| Includes Alarm | No Alarm Included |
| Series | HT450-Series |
| Liquid Temperature - Maximum | 180 deg F |
| Body Diameter | 9-5/8 in |
| Installation | Submersible |
| For Industry | Residential |
| Frequency | 60 Hz |
| Alert Output | Not Applicable |
| Solids Diameter - Maximum | 3/8 in |
| Current | 7.3 A |
| Impeller Design | Vortex |
| Hazardous Location Class | Not Rated |
| Horsepower | 0.5 |
| Alert Messaging | Not Applicable |
| Sump Pit Diameter - Minimum | 14 in |
| Standards | CSA, cUL |
| Control Panel Functions | Not Applicable |
| Rotation Speed - Maximum | 3,450 rpm |
| Alerts Indicated | Not Applicable |
| Feet of Head - Maximum | 34 ft |
| Power Source | Corded Electric |
| Power Source - TS Only | Corded Electric |
| Power Source - old | Corded Electric |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |