Submersible Sump Pump, HP 4/10, Phase - Pumps 1, Rated Voltage 115V AC, Hz 60 Hz, Amps 12 A, Switch Actuation Tether Float, Switch Electrical Connection Piggyback, Off Point 4 in, On Point 12 in, Body Material Cast Iron, Impeller Material Engineered Polymer, Shaft Seal Material - Pumps Carbon, Ceramic, Flow Rate @ 5 Ft. of Head 59.0 gpm, Flow Rate @ 10 Ft. of Head 51 gpm, Flow Rate @ 15 Ft. of Head 31.0 gpm, Max. Head 20 ft, Min. Sump Pit Dia. 18 in, Minimum Water Depth 18 in
| Cord Length | 25 ft |
|---|---|
| Discharge NPT | 1.5" F |
| HP | 4/10 |
| Hz | 60 Hz |
| Impeller Material | Engineered Polymer |
| Includes | High Temperature Switch |
| Max. Head | 20 ft |
| Motor RPM | 1,550 |
| Motor Type | Shaded pole |
| Voltage | 115 V |
| Phase | Single |
| Pump RPM | 1,550 |
| Cord Length - Pumps | 25 ft |
| High Temp. Rated Switch | Yes |
| Mechanical Seal | CRB, CMC, Buna-N, Stainless Steel |
| Manufacturers Warranty Length | 3 yr |
| Input Phase AC | 1 |
| NEC Cord Designation | SJEOOW |
| Gauge/Conductor | 5.3333 |
| Max. Head - Pumps | 20 ft |
| Pump Body Material | Cast Iron |
| High Temp. Rated Impeller | Yes |
| Thermal Protection | Yes |
| Shaft Seal Material - Pumps | Carbon, Ceramic |
| Duty | Continuous |
| Off Point | 4 in |
| Handle | Yes |
| Item | Submersible Sump Pump |
| High Temp. Rated Power Cord | Yes |
| Amps - Pumps | 12 |
| Item - Sump Pumps | Submersible Sump Pump |
| Max. Liquid Temp. | 200 deg F |
| Max. Diameter Solids | 3/4 in |
| Outlet | 1-1/2" FNPT |
| Alarm Included | No |
| GPM of Water @ 10 Ft. of Head | 51 |
| GPM of Water @ 15 Ft. of Head | 31 |
| Voltage - Pumps | 115 V AC |
| Impeller Material - Pumps | Engineered Polymer |
| Length | 9 in |
| Base Material | Cast Iron |
| Width | 7-3/4 in |
| Bearing Type | Ball |
| Min. Sump Pit Dia. | 18 in |
| Switch Type - Pumps | Float |
| Height | 11-13/32 in |
| Pump HP | 0.4 |
| On Point | 12 in |
| High Temp. Rated Thermal Overload | Yes |
| GPM of Water @ 5 Ft. of Head | 58 |
| Amps | 12 |
| Application | Dewatering |
| Width at Widest Point | 7-3/4 in |
| Body Material | Cast Iron |
| Overall Height | 11-1/2 in |
| Flow Rate @ 5 Ft. of Head | 59 gpm |
| Flow Rate @ 10 Ft. of Head | 51 gpm |
| Flow Rate @ 15 Ft. of Head | 31 gpm |
| Switch Electrical Connection | Piggyback |
| Discharge Standard | NPT |
| Discharge Dia. | 1-1/2 in |
| RPM | 1,550 |
| Duty Cycle | Continuous |
| Minimum Water Depth | 18 in |
| Phase - Pumps | 1 |
| Switch Actuation | Tether Float |
| Discharge | 1-1/2 in FNPT |
| Rated Voltage | 115 V AC |
| Discharge Gender | Female |
| Shaft Seal Material | Ceramic, Carbon |
| Motor Housing Material | Cast Iron |
| Rotation Speed - Maximum | 1,550 rpm |
| Feet of Head - Maximum | 19 ft |
| Connectivity | Not Applicable |
| Current | 13 A |
| Installation | Submersible |
| Control Panel Functions | Not Applicable |
| Body Diameter | 9-5/8 in |
| Alerts Indicated | Not Applicable |
| Discharge Diameter | 1-1/2 in |
| For Media Type | Clear Water |
| For Industry | Residential |
| Liquid Temperature - Maximum | 200 deg F |
| Horsepower | 0.4 |
| Power Source | Corded Electric |
| Frequency | 60 Hz |
| Hazardous Location Class | Not Rated |
| Solids Diameter - Maximum | 3/4 in |
| Impeller Design | Vortex |
| Flow Rate @ 10 ft of Head | 65 gpm |
| Alert Messaging | Not Applicable |
| Series | HT40-Series |
| Flow Rate @ 30 ft of Head | 0 gpm |
| Sump Pit Diameter - Minimum | 18 in |
| Alert Output | Not Applicable |
| Includes Alarm | No Alarm Included |
| Operation | Automatic |
| Power Source - TS Only | Corded Electric |
| Power Source - old | Corded Electric |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |