Effluent Pump, HP 1/2, Rated Voltage 208 to 230V AC, Hz 60 Hz, Phase - Pumps 1, Amps 9.7 A, Body Material Cast Iron, Impeller Material Cast Iron, Shaft Seal Material - Pumps Carbon, Ceramic, Switch Actuation No Switch Included, Switch Electrical Connection No Switch Included, Flow Rate @ 10 Ft. of Head 115 gpm, Flow Rate @ 15 Ft. of Head 107 gpm, Flow Rate @ 20 Ft. of Head 98 gpm, Flow Rate @ 40 Ft. of Head 57 gpm, Max. Head 63 ft, Min. Sump Pit Dia. 18 in, Body Dia. 9 3/8 in
| Item | Effluent Pump |
|---|---|
| Phase - Pumps | 1 |
| Cord Length | 20 ft |
| HP | 1/2 |
| Impeller Material | Cast Iron |
| Amps | 9.7 |
| Body Material | Cast Iron |
| Max. Head | 63 ft |
| Switch Actuation | No Switch Included |
| Flow Rate @ 40 Ft. of Head | 57 gpm |
| Overall Height | 13-3/4 in |
| Width at Widest Point | 12-1/4 in |
| Max. Diameter Solids | 3/4 in |
| Hz | 60 Hz |
| Discharge Dia. | 2 in |
| Shaft Seal Material - Pumps | Carbon, Ceramic |
| Flow Rate @ 20 Ft. of Head | 98 gpm |
| RPM | 3,450 |
| Phase | Single |
| Discharge | 2 in FNPT |
| Discharge Gender | Female |
| Flow Rate @ 15 Ft. of Head | 107 gpm |
| Body Dia. | 9-3/8 in |
| Max. Liquid Temp. | 120 deg F |
| Rated Voltage | 208 to 230V AC |
| Duty Cycle | Continuous, Intermittent |
| Manufacturers Warranty Length | 3 yr |
| Flow Rate @ 10 Ft. of Head | 115 gpm |
| Discharge Standard | NPT |
| Agency Compliance | cCSAus Listed |
| Min. Sump Pit Dia. | 18 in |
| Series | WS50HM-12-20 |
| Switch Electrical Connection | No Switch Included |
| Shaft Seal Type | Single Mechanical |
| For Media Type | Effluent Water, Grey Water |
| Sump Pit Diameter - Minimum | 18 in |
| Feet of Head - Maximum | 63 ft |
| Hazardous Location Class | Not Applicable |
| Flow Rate @ 20 ft of Head | 98 gpm |
| Liquid Temperature - Maximum | 120 deg F |
| Shaft Seal Material | Ceramic, Carbon |
| Standards | cCSAus Listed |
| Volute Material | Cast Iron |
| Body Diameter | 9-3/8 in |
| Flow Rate @ 40 ft of Head | 57 gpm |
| Current | 9.7 A |
| Horsepower | 0.5 |
| Rotation Speed - Maximum | 3,450 rpm |
| Power Source | Corded Electric |
| Frequency | 60 Hz |
| Solids Diameter - Maximum | 3/4 in |
| Requires Control Panel | No Control Panel Required |
| Flow Rate @ 10 ft of Head | 115 gpm |
| Discharge Diameter | 2 in |
| Motor Housing Material | Cast Iron |
| Power Source - TS Only | Corded Electric |
| Power Source - old | Corded Electric |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |