Sewage Ejector Pump, HP 2, Rated Voltage 460V AC, Hz 60 Hz, Phase - Pumps 3, Amps 6.1 A, Motor Type Permanent Split Capacitor, Body Material Cast Iron, Impeller Material Brass, Shaft Seal Material - Pumps Carbon, Ceramic, Switch Actuation No Switch Included, Switch Electrical Connection No Switch Included, On Point Not Applicable, Off Point Not Applicable, Flow Rate @ 10 Ft. of Head 205 gpm, Flow Rate @ 15 Ft. of Head 190 gpm, Flow Rate @ 20 Ft. of Head 168 gpm
| HP | 2 |
|---|---|
| Phase - Pumps | 3 |
| Switch Actuation | No Switch Included |
| Body Material | Cast Iron |
| Flow Rate @ 10 Ft. of Head | 205 gpm |
| Max. Head | 77 ft |
| Impeller Material | Brass |
| Max. Diameter Solids | 2 in |
| Discharge Dia. | 3 in |
| Hz | 60 Hz |
| Amps | 6.1 |
| Phase | Three |
| Discharge Standard | NPT |
| Min. Sump Pit Dia. | 18 in |
| Max. Liquid Temp. | 140 deg F |
| Motor Type | Permanent Split Capacitor |
| Width at Widest Point | 13 in |
| Agency Compliance | cCSAus Listed |
| Item | Sewage Ejector Pump |
| RPM | 3,200 |
| Shaft Seal Material - Pumps | Carbon, Ceramic |
| Manufacturers Warranty Length | 3 yr |
| Cord Length | 20 ft |
| Thermal Protection | Manual |
| Flow Rate @ 20 Ft. of Head | 168 gpm |
| Discharge Gender | Female |
| Series | 20S-CIM |
| Duty Cycle | Continuous |
| On Point | Not Applicable |
| Overall Height | 18-3/8 in |
| Discharge | 3 in FNPT |
| Switch Electrical Connection | No Switch Included |
| Gauge/Conductor | 14/4 |
| Off Point | Not Applicable |
| Flow Rate @ 40 Ft. of Head | 120 gpm |
| Rated Voltage | 460V AC |
| Flow Rate @ 15 Ft. of Head | 190 gpm |
| Body Dia. | 8.4 in |
| Flow Rate @ 60 Ft. of Head | 55 gpm |
| Motor Housing Material | Cast Iron |
| Sump Pit Diameter - Minimum | 24 in |
| Horsepower | 2 |
| Power Source | Corded Electric |
| Alert Output | Not Applicable |
| Discharge Diameter | 3 in |
| Alerts Indicated | Not Applicable |
| Hazardous Location Class | Not Applicable |
| Rotation Speed - Maximum | 3,450 rpm |
| Frequency | 60 Hz |
| For Media Type | Sewage Water |
| Control Panel Functions | Not Applicable |
| Connectivity | Not Applicable |
| Current | 6.1 A |
| Discharge Orientation | Vertical |
| Alert Messaging | Not Applicable |
| Liquid Temperature - Maximum | 140 deg F |
| Volute Material | Cast Iron |
| Feet of Head - Maximum | 77 ft |
| Standards | cCSAus Listed |
| Body Diameter | 8-1/2 in |
| Flow Rate @ 10 ft of Head | 208 gpm |
| Solids Diameter - Maximum | 2 in |
| Shaft Seal Material | Ceramic, Carbon |
| Requires Control Panel | No Control Panel Required |
| Motor Design | Permanent Split Capacitor |
| Installation | Submersible |
| Shaft Seal Type | Single Mechanical |
| Application | Dewatering, Transfer, Waste Removal |
| Impeller Design | Non-Clog |
| Power Source - TS Only | Corded Electric |
| Power Source - old | Corded Electric |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |