Submersible Pump Motor, Bearing Protection Not Applicable, Body Dia. 3.8 in, Bolt Circle Dia. 2 7/8 in, CC Number Not Applicable, Conduit Box Location Not Applicable, Conduit Box Position Not Applicable, Diaphragm Type Pressure Equalizing, Duty Cycle Continuous, Finish Not Applicable, Frame Not Applicable, Hz 60 Hz, Full Load Amps 3.8, Height 16 13/16 in, HP 3, Includes Not Applicable, Ins. Class B, Inverter Rated No, Inverter Rating Not Applicable, Lead Length 4 ft, Length Less Shaft 15 5/16 in
| Item | Submersible Pump Motor |
|---|---|
| Phase | Three |
| HP | 3 |
| Voltage | 575V AC |
| Number of Wires | 3 |
| RPM Range | 1,725 to 3,450 |
| Motor Service Factor | 1.15 |
| Motor Bearings | Kingsbury |
| Nameplate RPM | 3,450 |
| Overload Relay Amp Setting | 3.8 A |
| Max. Ambient Temp. | 86 deg F |
| Diaphragm Type | Pressure Equalizing |
| Height | 16-13/16 in |
| Shaft Material | Nitrile Rubber |
| Full Load Amps | 3.8 A |
| Stator Type | Hermetically Sealed |
| Motor Application | Pumps |
| Thrust Rating | 900 lb |
| Motor Thermal Protection | Built-In Lightning Arrestor |
| Overload Relay Required | No |
| Lead Length | 4 ft |
| Motor Enclosure Design | Hermetically Sealed |
| Motor Design | Three-Phase |
| Standards | ANSI/NSF 61 |
| Overload Relay Max. Amp Setting | 4.4 A |
| Starter Required | No |
| Hz | 60 Hz |
| Motor Shaft Rotation | CCW |
| Motor Sub Application | Water Wells |
| Max. SF Amps | 4.4 |
| Length Less Shaft | 15-5/16 in |
| Motor Mounting Position | Vertical Shaft Up |
| Weight | 41 lb |
| Duty Cycle | Continuous |
| Inverter Rated | Not Inverter Rated |
| Shaft Dia. | 5/8 in |
| Motor Mounting Type | NEMA Pump Mounting |
| Ins. Class | B |
| Shaft Length | 15-5/8 in |
| Body Dia. | 3.8 in |
| Manufacturers Warranty Length | 1 yr |
| Conduit Box Position | Not Applicable |
| NEMA Design | Not Applicable |
| Part Winding Start Capable | No |
| Ring to Ring Center | Not Applicable |
| Bearing Protection | Not Applicable |
| CC Number | Not Applicable |
| Conduit Box Location | Not Applicable |
| Regreasable Bearings | Not Applicable |
| Inverter Rating | Not Applicable |
| No. of Speeds | Not Applicable |
| Frame | Not Applicable |
| Includes | Not Applicable |
| Bolt Circle Dia. | 2-7/8 in |
| Overall Length | 16-1/16 in |
| Motor Frame Material | Stainless Steel |
| Motor Shaft Design | Splined |
| Finish | Not Applicable |
| Nominal Efficiency | 78% |
| Resilient Ring Dia. | Not Applicable |
| Frame Finish | Not Applicable |
| Nameplate Service Factor @ 60 Hz | 1.15 |
| Frequency | 60 Hz |
| Insulation Class | B |
| Series | 4" SUPER STAINLESS SUBMERSIBLE MOTORS |
| Motor Enclosure Type | Totally Enclosed Non-Ventilated |
| Sub Application | Deep Well Submersible Pump |
| Includes Low Temperature Monitor | Low Temperature Monitor Not Included |
| Frame Material | Stainless Steel |
| NEMA Design Class | Not Applicable |
| Manufacturers Warranty | 1 yr |
| Bearing Type | Kingsbury |
| Ring-to-Ring Center | Not Applicable |
| Bearing Lubrication Type | Not Applicable |
| Bolt Circle Diameter | 2-7/8 in |
| Overload Relay Current | 3.8 A |
| Requires Overload Relay | No |
| Includes Diaphragm | Diaphragm Included |
| Number of Speeds | Not Applicable |
| Shaft Diameter | 5/8 in |
| Efficiency Rating | Not Applicable |
| Product Type | Pump Motor |
| Mounting Position | Vertical Shaft Up |
| Body Diameter | 3.8 in |
| Bearing Protection Type | Not Applicable |
| Service Factor Current | 4.4 A |
| Frame Size | Not Applicable |
| Shaft Design | Splined |
| Resilient Ring Diameter | Not Applicable |
| Application | Pump |
| Full Load Current @ 60 Hz | 3.8 A |
| Overload Relay Maximum Amp Setting | 4.4 A |
| Wire Rope Length | 16-1/16 in |
| Length | 16-1/16 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |