| Application | Coat Pre-cut Gaskets for Increased Reliability |
|---|---|
| Color | Clear |
| Size | 300 mL |
| Substrates | Adhesion to Most Surfaces |
| Temp. Range | -65 to 450 deg F |
| Sealant Base | Silicone |
| Sealant Container | Cartridge |
| Item | Gasket Sealant |
| Type | General Purpose |
| Full Cure | 24 hr |
| Begins to Harden | 10 min |
| Viscosity | paste |
| Characteristics | Forms Tough Rubber Seal, Non-Slumping in Overhead Or Vertical Apps, Room Temp Cure, Temp Cycling, UV Light and Ozone Resistant |
| Standards | ANSI/NSF Standard 51, California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA |
| Specific Gravity | 1.01 @ 20 Degrees C |
| Flash Point | 199.4 deg F |
| Container Type | Cartridge |
| For Use With | Ceramic,Composite,Glass,Metal Aluminum,Metal Steel,Plastic |
| Green Certification or Other Recognition | NSF(R) Certified (Sustainability or Environmental Standard) |
| VOC Content | 30 g/L |
| Tensile Strength | 170 psi |
| Chemical Base | Acetoxy Silicone |
| Container Size | 10.14 fl oz |
| Product Form | Paste |
| Maximum Operating Temperature | 450 deg F |
| Resistance Properties | Non-Flammable |
| Storage Requirements | 8 Degrees to 21 Degrees C |
| Hardness | Shore A14 |
| Working Time | 30 min |
| Non-Hardening | Yes |
| Non-Toxic | Yes |
| Minimum Operating Temperature | -65 deg F |
| Sensor Safe | No |
| Sealant Type | Gasket Sealant |
| Series | SI 595 |
| For Material Type | Metal, Plastic |
| Full Cure Time | 1 day |
| Maximum Gap Fill Size | 0.24 in |
| Cure Type | Room Temperature Vulcanizing |
| Number of components | 1 Part |
| Wire Color | Clear |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |