Micro Drill Bit, Drill Bit Size #96, Drill Bit Point Angle 130 Degrees , 4 Facet Point, Carbide, Bright (Uncoated), +0.00 mm/-0.0003 mm, Spiral, 35 Degrees , General Purpose
| Item | Micro Drill Bit |
|---|---|
| Drill Bit Size | #96 |
| Shank Dia. | 1/8 in |
| Flute Length | 0.1 in |
| Overall Length | 1-1/2 in |
| Number of Flutes | 2 |
| Drill Bit Point Angle | 130 deg |
| Cutting Direction | Right Hand |
| Flute Type | Spiral |
| Decimal Equivalent | 0.0063 |
| Shank Type | Straight |
| Primary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Steel |
| Material | Carbide |
| Material - Machining | Carbide |
| Shank Type - Machining | Straight |
| Finish - Machining | Bright |
| Depth:Dia. Ratio | 14 xD |
| Finish | Uncoated |
| Primary Material Application ISO Code | N, P, K, O |
| Maximum Drilling Depth | 0.091 in |
| List Number | 302 |
| Helix Angle | 35 deg |
| Number of Coolant Holes | 0 |
| Circuit Board Drill | Yes |
| Web Construction | 4 Facet Point |
| Web Thinning | 4 Facet Point |
| Measurement System | Wire |
| Spiral Direction | Right Hand |
| Secondary Material Application | Brass, Bronze, Cast Iron, Copper, Hardened Steel, Stainless Steel, Steel, Titanium, Tool and Die Steel |
| Drill Length Class | Micro Length |
| Standards | ISO 9001:2015 Certified |
| Drill Bit Point Type | 4 Facet Point |
| Material Grade - Machining | General Purpose |
| Secondary Material Application ISO Code | S, M, P, K, H, N |
| Shank Length | 1.4 in |
| Aircraft Drill | No |
| Drill Diameter Tolerance | +0.00 mm/-0.0003 mm |
| Coolant Fed | Non-Coolant Through |
| Included Angle | 130 deg |
| Construction | Solid |
| Wire Rope Length | 1-1/2 in |
| Length | 1-1/2 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |