Micro Drill Bit, Drill Bit Size 0.8 mm, Drill Bit Point Angle 130 Degrees , 4 Facet Point, Carbide, AlTiN, +0.0000 in/-0.0005 in, Spiral, 35 Degrees , General Purpose
| Item | Micro Drill Bit |
|---|---|
| Drill Bit Size | 0.8 mm |
| Shank Dia. | 1/8 in |
| Flute Length | 10.16 mm |
| Overall Length | 38 mm |
| Number of Flutes | 2 |
| Drill Bit Point Angle | 130 deg |
| Cutting Direction | Right Hand |
| Flute Type | Spiral |
| Decimal Equivalent | 0.0315 |
| Finish - Machining | AlTiN |
| Primary Material Application ISO Code | N, P, K, O |
| Shank Type - Machining | Straight |
| List Number | 302 |
| Material - Machining | Carbide |
| Depth:Dia. Ratio | 11 xD |
| Primary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Steel |
| Maximum Drilling Depth | 8.97 mm |
| Standards | ISO 9001:2015 Certified |
| Circuit Board Drill | Yes |
| Aircraft Drill | No |
| Web Thinning | 4 Facet Point |
| Measurement System | Metric |
| Drill Length Class | Micro Length |
| Number of Coolant Holes | 0 |
| Spiral Direction | Right Hand |
| Drill Bit Point Type | 4 Facet Point |
| Material Grade - Machining | General Purpose |
| Web Construction | 4 Facet Point |
| Secondary Material Application | Brass, Bronze, Cast Iron, Copper, Hardened Steel, Stainless Steel, Steel, Titanium, Tool and Die Steel |
| Shank Length | 1.0961 in |
| Secondary Material Application ISO Code | S, M, P, K, H, N |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Helix Angle | 35 deg |
| Coolant Fed | Non-Coolant Through |
| Wire Rope Length | 38 mm |
| Length | 38 mm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |