Micro Drill Bit, Drill Bit Size 1.95 mm, Drill Bit Point Angle 135 Degrees , Carbide, AlCrN, +0.00 mm/-0.0003 mm, Spiral, 12 Degrees , High Performance
| Item | Micro Drill Bit |
|---|---|
| Drill Bit Size | 1.95 mm |
| Shank Dia. | 3 mm |
| Flute Length | 12.19 mm |
| Overall Length | 38 mm |
| Number of Flutes | 2 |
| Drill Bit Point Angle | 135 deg |
| Cutting Direction | Right Hand |
| Flute Type | Spiral |
| Decimal Equivalent | 0.0767 |
| Finish - Machining | AlCrN |
| Primary Material Application ISO Code | N, P, K, S, O, M, H |
| Shank Type - Machining | Straight |
| Maximum Drilling Depth | 9.14 mm |
| Primary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Hardened Steel, Stainless Steel, Steel |
| List Number | 305 |
| Depth:Dia. Ratio | 5 xD |
| Material - Machining | Carbide |
| Web Construction | Web Thinned |
| Spiral Direction | Right Hand |
| Number of Coolant Holes | 0 |
| Web Thinning | Web Thinned |
| Circuit Board Drill | No |
| Measurement System | Metric |
| Aircraft Drill | No |
| Secondary Material Application ISO Code | S, M, P, K, H, N |
| Shank Length | 1.0161 in |
| Drill Length Class | Micro Length |
| Secondary Material Application | Brass, Bronze, Cast Iron, Copper, Hardened Steel, Stainless Steel, Steel, Titanium, Tool and Die Steel |
| Helix Angle | 12 deg |
| Drill Diameter Tolerance | +0.00 mm/-0.0003 mm |
| Standards | ISO 9001:2015 Certified |
| Material Grade - Machining | High Performance |
| Coolant Fed | Non-Coolant Through |
| Wire Rope Length | 38 mm |
| Length | 38 mm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |