Micro Drill Bit, Drill Bit Size #42, Drill Bit Point Angle 130 Degrees , 4 Facet Point, Carbide, AlTiN, +0.0000 in/-0.0005 in, Spiral, 35 Degrees , General Purpose
| Item | Micro Drill Bit |
|---|---|
| Drill Bit Size | #42 |
| Shank Dia. | 1/8 in |
| Flute Length | 12/25 in |
| Overall Length | 1-1/2 in |
| Number of Flutes | 2 |
| Drill Bit Point Angle | 130 deg |
| Cutting Direction | Right Hand |
| Flute Type | Spiral |
| Decimal Equivalent | 0.0935 |
| List Number | 302 |
| Finish - Machining | AlTiN |
| Shank Type - Machining | Straight |
| Primary Material Application ISO Code | N, P, K, O |
| Primary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Steel |
| Maximum Drilling Depth | 0.34 in |
| Depth:Dia. Ratio | 4 xD |
| Material - Machining | Carbide |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Helix Angle | 35 deg |
| Aircraft Drill | No |
| Circuit Board Drill | Yes |
| Web Thinning | 4 Facet Point |
| Secondary Material Application ISO Code | S, M, P, K, H, N |
| Shank Length | 1.02 in |
| Drill Length Class | Micro Length |
| Number of Coolant Holes | 0 |
| Standards | ISO 9001:2015 Certified |
| Spiral Direction | Right Hand |
| Drill Bit Point Type | 4 Facet Point |
| Web Construction | 4 Facet Point |
| Measurement System | Wire |
| Material Grade - Machining | General Purpose |
| Secondary Material Application | Brass, Bronze, Cast Iron, Copper, Hardened Steel, Stainless Steel, Steel, Titanium, Tool and Die Steel |
| Coolant Fed | Non-Coolant Through |
| Wire Rope Length | 1-1/2 in |
| Length | 1-1/2 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |