Washdown Motor, Three Phase, Motor Design Three-Phase, 10 hp HP, Nameplate RPM 1,760 RPM, No. of Speeds 1, Voltage 230/460V AC, Full Load Amps 26.4/13.2 A, 215TC Frame, Usable @ 208V Usable at 208V, Usable @ 200V Usable at 200V, 60/50 Hz Hz, Motor Service Factor 1.15, Motor Thermal Protection None, Ins. Class F, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, NEMA Design B, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Totally Enclosed Fan Cooled, Motor Mounting Type C-Face
| Item | Washdown Motor |
|---|---|
| Motor Design | Three-Phase |
| Phase | Three |
| HP | 10 hp |
| RPM Range | 1,701-1,800 |
| Voltage | 230/460V AC |
| Frame | 215 TC |
| Motor Frame Material | Steel |
| Motor Thermal Protection | None |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Application | General Purpose |
| Max. Ambient Temp. | 40 Degrees C |
| Full Load Amps | 26.4/13.2 A |
| Length Less Shaft | 17-1/8 in |
| Motor Mounting Type | C-Face |
| Voltage Compatibility | 200-230/440V AC, 200-230/460V AC, 208-220/440V AC, 208-230/460V AC, 230/460V AC |
| Motor Bearings | Ball |
| Shaft Length | 3-1/8 in |
| Hz | 60/50 Hz |
| Nominal Efficiency | 91.7% |
| Ins. Class | F |
| CC Number | CC005A |
| Nameplate RPM | 1,760 RPM |
| Motor Service Factor | 1.15 |
| Motor Shaft Rotation | CCW, CW |
| Frame Material | Rolled steel |
| Shaft Dia. | 1-3/8 in |
| Application | General Purpose |
| Shaft Material | Stainless Steel |
| Standards | BISSC Approved, CE, CSA Certified, UL Recognized, USDA Approved |
| Body Dia. | 11-1/2 in |
| NEMA Design | B |
| Motor Mounting Position | Horizontal |
| Motor Shaft Design | Keyed |
| Overall Length | 18-3/4 in |
| Green Certification or Other Recognition | NEMA Premium(R) Rated |
| Bolt Circle Dia. | 7-1/4 in |
| No. of Speeds | 1 |
| Usable @ 200V | Usable at 200V |
| Finish | Epoxy-Coated |
| Duty Cycle | Continuous |
| Manufacturers Warranty Length | 1 yr |
| Conduit Box Location | Exterior |
| Usable @ 208V | Usable at 208V |
| Weight | 180 lb |
| Motor Sub Application | Not Applicable |
| RPM @ 50Hz | Not Applicable |
| Series | Washguard |
| HP @ 50Hz | Not Applicable |
| Inverter Rating | 10:1 |
| Endshield Material | Aluminum |
| Duty Ratio | Not Applicable |
| Maximum Run Time | Not Applicable |
| Conduit Box Position | F1 |
| Wire Rope Length | 18-3/4 in |
| Length | 18-3/4 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |