Split Lock Washer, Hi-Collar, Steel, Finish Metric Blue, Fits Bolt Sizes M10, Inside Dia. 10.50mm, Outside Dia. 15.50mm, Thickness 2.5mm, Thickness Tolerance +/-0.150mm, Rockwell Hardness HRC 44-51, General Purpose, For Use With Socket Head Cap Screws, Meets/Exceeds DIN 7980, Package Quantity 100
| Item | Split Lock Washer |
|---|---|
| Material | Steel |
| Finish | Metric Blue |
| For Screw Size | M10 |
| Outside Diameter | 15.5 mm |
| Minimum Thickness | 2.5 mm |
| Maximum Thickness | 2.5 mm |
| Standards | DIN 7980 |
| System of Measurement | Metric |
| Inside Diameter | 10.5 mm |
| Material Grade/Class | Not Applicable |
| Package Quantity | 100 |
| Rockwell Hardness | HRC44 |
| Thickness Tolerance | +/-0.15 mm |
| Application | General Purpose |
| Color | Blue |
| Pack Size | Small Pack |
| Lock Washer Type | Split Lock |
| For Use With | Socket Head Cap Screws |
| Dimensional Standards | DIN 7980 |
| Section Width - Minimum | 2.5 mm |
| Hardness | 44 HRC |
| Minimum Inside Diameter | 10.5 mm |
| Outside Diameter - Maximum | 15.5 mm |
| Tooth Length - Maximum | Not Applicable |
| Outside Diameter - Minimum | 15.5 mm |
| Washer Type | High Collar |
| FDA Approved | Not FDA Approved |
| Bearing Width - Minimum | 5 mm |
| Inside Diameter - Maximum | 10.5 mm |
| Type | Split Lock Washer |
| Metal Detectable | Metal Detectable |
| Tooth Length - Minimum | Not Applicable |
| X-Ray Detectable | X-Ray Detectable |
| MIL-SPEC Standards | MS35338 |
| Shell Material | Steel |
| Wire Color | Blue |
| Country of Origin (subject to change) | Italy |