This Milwaukee Valve UP967 series swing check valve is a 1/2 in. inline check valve with threaded FNPT x FNPT connections. It features a brass swing mechanism intended to permit flow in one direction and restrict reverse flow. The low lead brass construction is rated for general purpose gas, oil, and water service, subject to listed pressure and temperature specifications. Certifications include NSF 61 and NSF/ANSI 372.
Key Features:
- Valve type: Swing check valve with inline body design
- Body material: Low lead brass with brass body, mechanism, seal, and seat materials
- Connection size and type: 1/2 in. female NPT on both ends; FNPT x FNPT threaded connections
- Flow capacity: 10 GPM with Cv of 10
- Cracking pressure: 0.5 psi
- Pressure rating: 200 psi WOG; maximum water pressure 200 psi at 150 degrees F
- Temperature range: -20 degrees F to 150 degrees F
- Mounting orientation: Horizontal or vertical; multi-positional
- Flow design: Single, full flow
- Certifications/standards: NSF 61, NSF/ANSI 372
- Dimensions: Overall length 1.86 in.; overall height 2 3/32 in.; width 1 in.
| Pipe Size | 1/2" |
|---|---|
| Hex Size | Not Applicable |
| Connection Type | Threaded |
| Connection | Threaded |
| Body Material | Brass |
| Seat Material | Brass |
| Item | Swing Check Valve |
| Mounting Orientation - Check Valves | Horizontal, Vertical |
| Width | 1 in |
| Sub-Category | Brass |
| Item - Check Valves | Check Valve |
| Max. Pressure | 200 psi WOG |
| Application - Valves | General Purpose |
| Max. Steam Pressure - Valves | Not Rated |
| Max. Water Pressure - Valves | 200 psi @ 150 Degrees F |
| Mounting Position | Multi Positional |
| Length | 2-1/8 in |
| Seal Material - Check Valves | Brass |
| Body Material - Valves | Brass |
| Size | 1/2" |
| Connection Type - Check Valves | FNPT x FNPT |
| Material of Construction | Low Lead Brass |
| Mechanism and Body Design | Inline Swing |
| Cap to Inlet Center | 1-17/32 in |
| Flow - Valves | 10 gpm |
| Full Flow - Valves | Yes |
| Max. Temp. - Valves | 150 deg F |
| Pipe or Tube Size - Check Valves | 1/2 in |
| Cracking Pressure - Check Valves | 0.5 psi |
| Standards | NSF/ANSI 372 |
| Seat Material - Check Valves | Metal |
| Cracking Pressure | 0.5 psi |
| Min. Temp. - Valves | -20 deg F |
| Overall Height | 2-3/32 in |
| Flow Design | Single |
| Max. Temp. | 150 deg F |
| Seal Material | Brass |
| Overall Length | 1.86 in |
| Flow | 10 gpm |
| Spring Material | Not Applicable |
| Mounting Orientation | Horizontal, Vertical |
| Pipe or Tube Size | 1/2 in |
| Type | Swing |
| Connection Gender - Side 1 | Female |
| Connection Gender - Side 2 | Female |
| Connection Size - Side 1 | 1/2 in |
| Valve Body Style | Inline |
| 3-A Standard Compliance | Not Rated |
| Vacuum Service Rating | Not Rated |
| For Media | Gas, Oil, Water |
| Check Mechanism Material | Brass |
| Maximum Pressure - Operating | 200 psi |
| Nominal Valve Size | 1/2 in |
| NSF Certifications for Food and Drinking Water | NSF 61 |
| ANSI Flange Class | Not Applicable |
| Operating Temperature - Maximum | 150 deg F |
| Average Surface Roughness (Ra) | Not Applicable |
| Coefficient of Volume (Cv) | 10 |
| Connection Type - Side 1 | NPT |
| Includes Counterweight | No Counterweight |
| Silent Check | Standard |
| Maximum Pressure - Steam | Not Rated |
| Height - Cap to Inlet Center | 1-3/8 in |
| Connection Size - Side 2 | 1/2 in |
| Connection Type - Side 2 | NPT |
| Check Mechanism | Swing |
| Operating Temperature - Minimum | -20 deg F |
| Valve Series | UP967 |
| Wire Rope Length | 1.86 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |