MILWAUKEE VALVE Series 507 is a 1/2 in swing Y check valve with a bronze body and FNPT x FNPT female threaded connections. It is intended for one-way flow applications in general purpose piping systems handling gas, oil, steam, and water. The Y-style body includes a swing check mechanism for reverse-flow control applications. Flow rate: 10 gpm; Cv: 7.2.
Key Features:
- Swing Y check valve with single-flow design and Y-style body
- 1/2 in nominal valve size with 1/2 in FNPT x FNPT connections
- Female NPT connections on both ends
- Cast bronze body with bronze check mechanism and bronze seat
- Cracking pressure: 0.750 to 1.000 psi
- Flow rate: 10 gpm
- Cv: 7.2
- Maximum water pressure: 600 psi at 150 Degrees F
- Maximum steam pressure: 300 psi WSP
- Maximum pressure: 300 psi SWP - 600 psi WOG
- Operating temperature range: -20 Degrees F to 550 Degrees F
- Mounting orientation: horizontal or vertical
- Overall length: 2.63 in
- Cap to inlet center: 1 3/4 in
- Standard check design; no counterweight
- Standards: ASTM A276 TY.304, ASTM B16, ASTM B61, MSS SP-80
| Pipe Size | 1/2" |
|---|---|
| Hex Size | Not Applicable |
| Connection Type | FNPT x FNPT |
| Connection | FNPT |
| Body Material | Bronze |
| Pipe or Tube Size - Check Valves | 1/2 in |
| Seal Material - Check Valves | Chrome, Cobalt |
| Max. Steam Pressure - Valves | 300 psi WSP |
| Item - Check Valves | Check Valve |
| Application - Valves | General Purpose |
| Mounting Orientation - Check Valves | Horizontal, Vertical |
| Max. Temp. | 550 deg F |
| Max. Steam Pressure | 300 psi WSP |
| Min. Temp. - Valves | -20 deg F |
| Standards | ASTM A276 TY.304, ASTM B16, ASTM B61, MSS SP-80 |
| Item | Swing Y Check Valve |
| Body Material - Valves | Bronze |
| Length | 2-5/8 in |
| Full Flow - Valves | Yes |
| Cracking Pressure | 0.5 psi |
| Mounting Position | Horizontal, Vertical |
| Sub-Category | Bronze |
| Flow Design | Single |
| Max. Temp. - Valves | 550 deg F |
| Material of Construction | Bronze |
| Mechanism and Body Design | Y Swing |
| Seat Material - Check Valves | Bronze |
| Flow - Valves | 10 gpm |
| Size | 1/2" |
| Max. Water Pressure - Valves | 600 psi @ 150 Degrees F |
| Cap to Inlet Center | 1-3/4 in |
| Cracking Pressure - Check Valves | 0.750 to 1.000 psi |
| Connection Type - Check Valves | FNPT x FNPT |
| Max. Pressure | 300 psi SWP - 600 psi WOG |
| Overall Length | 2.63 in |
| Spring Material | Not Applicable |
| Seal Material | Bronze |
| Seat Material | Bronze |
| Flow | 10 gpm |
| Pipe or Tube Size | 1/2 in |
| Mounting Orientation | Horizontal |
| Type | Y Pattern |
| Connection Gender - Side 2 | Female |
| Height - Cap to Inlet Center | 1-3/4 in |
| Silent Check | Standard |
| Vacuum Service Rating | Not Rated |
| Connection Size - Side 2 | 1/2 in |
| Average Surface Roughness (Ra) | Not Applicable |
| Includes Counterweight | No Counterweight |
| Connection Size - Side 1 | 1/2 in |
| Valve Body Style | Y-Style |
| Connection Gender - Side 1 | Female |
| Operating Temperature - Maximum | 550 deg F |
| Connection Type - Side 1 | NPT |
| Coefficient of Volume (Cv) | 7.2 |
| Check Mechanism | Swing |
| 3-A Standard Compliance | Not Rated |
| Maximum Pressure - Operating | 600 psi |
| Maximum Pressure - Steam | 300 psi |
| Operating Temperature - Minimum | -20 deg F |
| ANSI Flange Class | Not Applicable |
| Check Mechanism Material | Bronze |
| Connection Type - Side 2 | NPT |
| For Media | Gas, Oil, Steam, Water |
| Nominal Valve Size | 1/2 in |
| Valve Series | 507 |
| Wire Rope Length | 2.63 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |