Wedge Anchor Bolt, System of Measurement Metric, Anchor Diameter 18 mm, Thread Size M12, Overall Length 117 mm, Thread Length Not Applicable, Eyelet Hole Size Not Applicable, Material Steel, Material Grade/Class Class 8.8, Finish Zinc Plated, Compatible Material Concrete, Drill Bit Size 18 mm, Minimum Installation Depth 60 mm, Minimum Material Thickness 177 51/64 mm, Ultimate Shear Strength (4,000 psi Concrete) 18,849 lb, Ultimate Tension Strength (4,000 psi Concrete) 9,988 lb, Nut Width 19 mm
| Item | Wedge Anchor |
|---|---|
| Compatible Material | Concrete |
| Anchor Diameter | 18 mm |
| Overall Length | 117 mm |
| Sub-Brand | SZ-S |
| Material | Steel |
| Finish | Zinc Plated |
| Seismic Approved | Yes |
| ICC Approved for Cracked Concrete | Yes |
| Drill Bit Size | 18 mm |
| Thread Size | M12 |
| Minimum Installation Depth | 60 mm |
| Maximum Material Thickness | 10 mm |
| Ultimate Shear Strength (4,000 psi Concrete) | 18,849 lb |
| Ultimate Tension Strength (4,000 psi Concrete) | 9,988 lb |
| Includes | Nut, Washer |
| Allowable Tension in 2500 PSI Uncracked Concrete (Lbs.) | 3,114 |
| Allowable Shear in 6500 PSI Cracked Concrete (Lbs.) | 6,597 |
| Allowable Shear in 2500 PSI Uncracked Concrete (Lbs.) | 4,751 |
| Allowable Tension in 6500 PSI Uncracked Concrete (Lbs.) | 5,008 |
| Allowable Shear in 6500 PSI Uncracked Concrete (Lbs.) | 6,597 |
| Allowable Tension in 2500 PSI Cracked Concrete (Lbs.) | 2,206 |
| Material Grade | Class 8.8 |
| Allowable Tension in 6500 PSI Cracked Concrete (Lbs.) | 3,547 |
| Allowable Shear in 2500 PSI Cracked Concrete (Lbs.) | 4,751 |
| Embedment In Concrete | 80 mm |
| ICC Approved for Un-Cracked Concrete | Yes |
| Thread Length | Not Applicable |
| Industry Standards | ETA-02/0030, ICC ESR-3173 |
| Wedge Anchor Type | Seismic Wedge Anchor |
| Maximum Installation Torque | 59 ft-lb |
| Minimum Ultimate Tension Strength | 3,765 lb |
| Removable | Removable |
| Manufacturer Location | Made in USA |
| Series | SZ-S |
| Minimum Installation Torque | 59 ft-lb |
| Maximum Ultimate Shear Strength | 44,623 lb |
| Nut Width | 19 mm |
| Maximum Ultimate Tension Strength | 21,444 lb |
| Material Quality Standards | ACI 318 Category 1 |
| Thread Pitch | 1.75 mm |
| Washer Outside Diameter | 30 mm |
| System of Measurement | Metric |
| Minimum Material Thickness | 177.7969 mm |
| Material Grade/Class | Class 8.8 |
| Minimum Ultimate Shear Strength | 5,620 lb |
| Eyelet Hole Size | Not Applicable |
| Wire Rope Length | 117 mm |
| Length | 117 mm |
| Shell Material | Steel |
| Country of Origin (subject to change) | Germany |
| Package Quantity | 20 |