Flange Mount Bearing, Back Side to Center Width 0.875 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Spherical Roller, Bore Diameter 1 15/16 in, Bore Type Cylindrical, Center Height Not Applicable, Closure Double Sealed, Expansion Type Expansion, For Environment Not Applicable, Housing Material Cast Iron, Housing Type Circular, Included Bearing SLA10, Lubricant Material Lithium Complex Grease - NLGI #2, Maximum Speed 2,400 RPM, Maximum Temperature 250 Degrees F
| Dynamic Load Capacity | 19,000 lbf |
|---|---|
| Includes | Expansion M2000 Spherical Roller Bearing |
| Static Load Capacity | 22,500 lb |
| Temp. Range | -40 Degrees to 250 Degrees F |
| Item | Flange Mount Bearing |
| Bore Dia. | 1-15/16 in |
| Bolt Size | 7/16 in |
| Dimension B | 6-3/8 in |
| Bearing Housing Material Type | Cast Iron |
| Overall Length | 6-3/8 in |
| Bearing Insert Type | Spherical Roller |
| Dimension E | 7/8 in |
| Dimension C | 2-3/16 in |
| Dimension F | 7/16 in |
| Dimension H | 1/2 in |
| Dimension G | 1-1/2 in |
| Dimension A | 2-15/16 in |
| Shaft Locking Type | Set Screws |
| Dimension L | 2-7/8 in |
| Overall Height | 2-3/16 in |
| Dimension M | 3-51/64 in |
| Dimension N | 2 7/8 in |
| Overall Width | 3 in |
| Dimension D | 5-3/8 in |
| Bolt Hole Center-to-Center | 3-51/64 in |
| Bearing Insert Material | Alloy Steel |
| Bearing Lubrication | Relubricateable |
| Flange Thickness | 1/2 in |
| Housing Material | Cast Iron |
| Housing Material Finish | Painted |
| Expansion Type | Expansion |
| Closure | Double Sealed |
| Lubricant Material | Lithium Complex Grease - NLGI #2 |
| Mount Hole Center-to-Center Length | 5-3/8 in |
| Mounting Bolt Size | 7/16 in |
| Mount Hole Center-to-Center Height | 5-3/8 in |
| Maximum Misalignment Angle | 1.5 deg |
| Rolling Element Rows | 2 |
| Bore Diameter | 1-15/16 in |
| Maximum Temperature | 250 deg F |
| Minimum Temperature | 0 deg F |
| Static Radial Load Capacity | 22,500 lbf |
| Number of Mount Holes | 4 |
| Lubrication Openings | Grease Fitting |
| Bearing Material Grade | AISI 52100 |
| Mount Hole Size | 7/16 in |
| Housing Material Grade | Class 30 |
| Application | Air Handling, Conveying, Food Processing, Forestry, Paper, Screening |
| Bore Type | Cylindrical |
| Features | Assembled, Adjusted and Pre-Lubricated in Advance for Immediate Use, Piloted Flange Housings are Machined with Back-Out Holes, Precision Ground Contours, Rotating Center Guide Ring for Least Possible Friction |
| Seal Type | Triple Lip |
| System of Measurement | Inch |
| Bolt Circle Diameter | 5-3/8 in |
| Housing Type | Circular |
| Wire Rope Length | 6-3/8 in |
| Number of Rows | 2 |
| Series | M2000 |
| Included Bearing | SLA10 |
| Seal Material | Nitrile |
| Split Housing | Not Split |
| Length | 6-3/8 in |
| Maximum PV | Not Applicable |
| Pilot Diameter | 4-1/2 in |
| Maximum Speed | 2,400 rpm |
| Back Side to Center Width | 7/8 in |
| Load Direction | Radial |
| Internal Clearance | C2 |
| For Environment | Not Applicable |
| Overall Diameter | 6-3/8 in |
| Resistance Properties | Dust and Dirt-Resistant, Rust-Resistant |
| Self Lubricating Bearing | No |
| Maximum Ball Swivel | Not Applicable |
| Center Height | Not Applicable |
| Bore Diameter Tolerance | 0 to -0.001 in |
| Includes Bearing Cap | Bearing Cap Not Included |
| Inner Ring Width | Not Applicable |
| Standards | Not Applicable |
| Fits Chest Size | Assembled, Adjusted and Pre-Lubricated in Advance for Immediate Use, Piloted Flange Housings are Machined with Back-Out Holes, Precision Ground Contours, Rotating Center Guide Ring for Least Possible Friction |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |