Steam Trap, Air Vent Material Stainless Steel, Allowable Pressure - Maximum 232 psi, Allowable Temperature - Minimum Not Applicable, Application Process Equipment, Body Material Cast Iron, Condensate Capacity 5,200 lb/hr, Configuration In-line, Distance Between Inlet and Outlet Port 8 1/2 in, Float Material Stainless Steel, Includes Air Vent Air Vent Included, Includes Strainer Not Applicable, Installation Orientation Horizontal, Lever Assembly Material Stainless Steel, Manufacturer Series FTE
| Item | Steam Trap |
|---|---|
| (F)NPT Connections | 1 in |
| Max. Operating PSI | 65 psi |
| End to End Length | 8-1/2 in |
| Condensate Capacity Lbs/Hr | 5,200 lb/hr |
| Max. Temp. | 450 Degrees F |
| Body Material | Cast Iron |
| Application | Process Equipment |
| Type | Inline |
| NPT Outlet | 1 in |
| Pressure Air Vent | Releases Air and Non-Condensable Gases that Adversely Affect the Heat Transfer of a Steam System |
| Pipe Configuration | Straight, In line |
| Downstream PSI Range | 65 psi |
| Allowable Pressure - Maximum | 232 psi |
| Lever Assembly Material | Stainless Steel |
| Allowable Temperature - Minimum | Not Applicable |
| Resistance Properties | Corrosion Resistant, Water Hammer Resistant |
| Includes Strainer | Not Applicable |
| Port Connection Gender | Female |
| Manufacturer Series | FTE |
| Number of Ports | 2 |
| Steam Trap Type | Thermostatic, Float |
| Distance Between Inlet and Outlet Port | 8-1/2 in |
| Port Connection Type | NPT |
| Float Material | Stainless Steel |
| Operating Temperature - Maximum | 450 deg F |
| Installation Orientation | Horizontal |
| Operating Pressure - Maximum | 65 psi |
| Condensate Capacity | 5,200 lb/hr |
| Maximum Capacity at Maximum Pressure Load | 5,200 lb/hr @ 65 psi |
| Includes Air Vent | Air Vent Included |
| Port Connection Size | 1 in |
| Air Vent Material | Stainless Steel |
| Configuration | In-line |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |