Insert Bearing, Ball Material Alloy Steel, Bearing Industry Number UCS205-014LD1NR, Bearing Insert Type Radial/Deep Groove Ball, Bearing Insert Shape Cylindrical, Bore Diameter 7/8 in, Closure Double Sealed, Maximum Temperature 250 Degrees F, Minimum Temperature -4 Degrees F, Outer Ring Width 0.669 in, Outside Diameter 2 3/64 in, Plain Bearing Material Steel, Ring Material Alloy Steel, Rolling Element Material Alloy Steel, Rolling Element Rows 1, Seal Type Contact, Shaft Locking Type Set Screws
| Item | Insert Bearing |
|---|---|
| Bore Dia. | 7/8 in |
| Outside Dia. | 52 mm |
| Series | Set Screw Insert Bearing |
| Width | 34 mm |
| Dynamic Load Capacity (Lb.) | 3,150 |
| Locking Type | Setscrew |
| Inside Dia. | 7/8 in |
| Bearing Material | Steel |
| Includes | Set Screws, Retaining Ring |
| Bearing Industry Number | UCS205-014LD1NR |
| Rolling Element Rows | 1 |
| Static Radial Load Capacity | 1,765 lbf |
| Ring Material | Alloy Steel |
| Maximum Temperature | 250 deg F |
| Bearing Insert Type | Radial/Deep Groove Ball |
| Ball Material Grade | AISI 52100 |
| Inner Ring Width | 34 mm |
| Shaft Locking Type | Set Screws |
| Dynamic Radial Load Capacity | 3,150 lbf |
| Seal Type | Contact |
| Load Direction | Radial |
| Bore Diameter | 7/8 in |
| Bearing Insert Shape | Cylindrical |
| System of Measurement | Inch |
| Lubrication Openings | Groove with Oil Hole |
| Seal Material | Nitrile |
| Minimum Temperature | -4 deg F |
| Rolling Element Material Grade | AISI 52100 |
| Closure | Double Sealed |
| Ring End to Center Width | 0.78 in |
| Ball Material | Alloy Steel |
| Rolling Element Material | Alloy Steel |
| Plain Bearing Material | Steel |
| Ring Material Grade | AISI 52100 |
| Outside Diameter | 2-3/64 in |
| Outer Ring Width | 0.669 in |
| Industry Number | UCS205-014LD1NR |
| Internal Clearance | CN |
| Lubricant Material | NLGI #3 Equivalent |
| Number of Rows | 1 |
| Bearing Lubrication | Relubricateable |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |