Pillow Block Bearing, Base Height 0.59 in, Base Width 1.299 in, Bearing Insert Material Stainless Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 3/8 in, Bore Type Cylindrical, Center Height 47/64 in, Closure Open, Housing Material Stainless Steel, Lubricant Material H-1 Food Grade Solid Lubricant, Maximum Speed 3,700 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -4 Degrees F, Mount Hole Center-to-Center Length 5 7/64 in, Mount Type Bolt-Through, Number of Mount Holes 2
| System of Measurement | Inch |
|---|---|
| Item | Pillow Block Bearing |
| Shaft Locking Type | Set Screw |
| Housing Material | Stainless Steel |
| Bearing Material | Stainless Steel |
| Bearing Insert Type | Ball |
| Bearing Insert Material | Stainless Steel |
| Bore Diameter | 1-3/8 in |
| Series | SUCFL |
| Closure | Open |
| Center Height | 47/64 in |
| Mount Hole Center-to-Center Length | 5-7/64 in |
| Mount Hole Size | 0.63 in |
| Overall Length | 6.141 in |
| Overall Width | 3.543 in |
| Overall Height | 1.748 in |
| Finish | Chrome Plated |
| Includes | Stainless Steel End Cap |
| Temp. Range | -4 to 230 deg F |
| Standards | FDA |
| Mounting Bolt Size | M14 |
| Base Width | 1.299 in |
| Maximum Speed | 3,700 rpm |
| Static Radial Load Capacity | 3,507 lbf |
| Seal Type | Contact |
| Maximum Temperature | 250 deg F |
| Number of Mount Holes | 2 |
| Seal Material | Silicone |
| Base Height | 0.59 in |
| Bore Type | Cylindrical |
| Minimum Temperature | -4 deg F |
| Dynamic Radial Load Capacity | 4,519 lbf |
| Mount Type | Bolt-Through |
| Lubricant Material | H-1 Food Grade Solid Lubricant |
| Resistance Properties | Corrosion-Resistant |
| Inner Ring Width | 1.689 in |
| Features | Normal Duty |
| Housing Material Grade | Type 304 |
| Bearing Material Grade | 440C |
| Wire Rope Length | 6.141 in |
| Length | 6.141 in |
| Fits Chest Size | Normal Duty |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |