Pillow Block Bearing, Base Height 0.7 in, Bearing Insert Material Stainless Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 3/16 in, Bore Type Cylindrical, Center Height 1 11/16 in, Closure Double Sealed, Housing Material Polymer, Lubricant Material FDA/USDA-H1 Solid Grease, Maximum Temperature 212 Degrees F, Minimum Temperature -4 Degrees F, Mount Hole Center-to-Center Length 4 43/64 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 3.265 in, Overall Length 6.375 in
| System of Measurement | Inch |
|---|---|
| Item | Pillow Block Bearing |
| Shaft Locking Type | Set Screw |
| Housing Material | Polymer |
| Bearing Insert Type | Ball |
| Bearing Insert Material | Stainless Steel |
| Bore Diameter | 1-3/16 in |
| Series | Sentinel Series |
| Closure | Double Sealed |
| Center Height | 1-11/16 in |
| Mount Hole Center-to-Center Length | 4-43/64 in |
| Mount Hole Size | 0.551 in |
| Overall Length | 6-3/8 in |
| Overall Width | 1.796 in |
| Overall Height | 3.265 in |
| Finish | Unfinished |
| Standards | IP69K |
| Bearing Lubrication | Maintenance-Free |
| Includes | (2) Open End Caps |
| Temp. Range | 14 to 212 deg F |
| Bore Type | Cylindrical |
| Mount Type | Bolt-Through |
| Minimum Temperature | -4 deg F |
| Inner Ring Width | 1-1/2 in |
| Dynamic Radial Load Capacity | 3,754 lbf |
| Number of Mount Holes | 2 |
| Mounting Bolt Size | 1/2, M12 |
| Base Height | 0.7 in |
| Bearing Material Grade | 440C |
| Static Radial Load Capacity | 2,023 lbf |
| Resistance Properties | Corrosion-Resistant |
| Lubricant Material | H-1 Food Grade Solid Lubricant |
| Maximum Temperature | 212 deg F |
| Housing Material Grade | PBT |
| Seal Type | Contact |
| Wire Rope Length | 6-3/8 in |
| Maximum PV | Not Applicable |
| Expansion Type | Fixed |
| Internal Clearance | CN |
| Maximum Speed | 4,300 rpm |
| Split Housing | Not Split |
| Length | 6-3/8 in |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |