Pillow Block Bearing, Base Height 0.511 in, Base Width 2.007 in, Bearing Insert Material Stainless Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 5/8 in, Bore Type Cylindrical, Center Height 2 1/8 in, Closure Double Sealed, Housing Material Stainless Steel, Lubricant Material FDA/USDA-H1 Solid Grease, Maximum Speed 3,100 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -4 Degrees F, Mount Hole Center-to-Center Length 3 3/4 in, Mount Type Bolt-Through, Number of Mount Holes 2
| System of Measurement | Inch |
|---|---|
| Item | Pillow Block Bearing |
| Shaft Locking Type | Set Screw |
| Housing Material | Stainless Steel |
| Bearing Insert Type | Ball |
| Bearing Insert Material | Stainless Steel |
| Bore Diameter | 1-5/8 in |
| Series | Sentinel Series |
| Closure | Double Sealed |
| Center Height | 2-1/8 in |
| Mount Hole Center-to-Center Length | 3-3/4 in |
| Mount Hole Size | M12 |
| Overall Length | 5 in |
| Overall Width | 2.689 in |
| Overall Height | 4-1/4 in |
| Finish | Unfinished |
| Standards | IP69K |
| Bearing Lubrication | Maintenance-Free |
| Temp. Range | 14 to 212 deg F |
| Includes | Closed End Cap, Open End Cap |
| Inner Ring Width | 1.937 in |
| Mounting Bolt Size | M12 |
| Lubricant Material | H-1 Food Grade Solid Lubricant |
| Features | Normal Duty |
| Seal Material | Silicone |
| Maximum Speed | 3,100 rpm |
| Maximum Temperature | 212 deg F |
| Base Width | 2.007 in |
| Number of Mount Holes | 2 |
| Mount Type | Bolt-Through |
| Dynamic Radial Load Capacity | 5,778 lbf |
| Seal Type | Contact |
| Bore Type | Cylindrical |
| Bearing Material Grade | 440C |
| Minimum Temperature | -4 deg F |
| Static Radial Load Capacity | 4,676 lbf |
| Base Height | 0.511 in |
| Wire Rope Length | 5 in |
| Internal Clearance | CN |
| Split Housing | Not Split |
| Maximum PV | Not Applicable |
| Expansion Type | Fixed |
| Length | 5 in |
| Fits Chest Size | Normal Duty |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |