Pillow Block Bearing, Base Height 0.57 in, Bearing Insert Material Stainless Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 in, Bore Type Cylindrical, Center Height 1 7/16 in, Closure Double Sealed, Expansion Type Fixed, Housing Material Polymer, Lubricant Material H-1 Food Grade Solid Lubricant, Maximum Speed 5,100 RPM, Maximum Temperature 212 Degrees F, Minimum Temperature -4 Degrees F, Mount Hole Center-to-Center Length 4 1/8 in, Mount Type Bolt-Through, Number of Mount Holes 2
| System of Measurement | Inch |
|---|---|
| Item | Pillow Block Bearing |
| Shaft Locking Type | Set Screw |
| Housing Material | Thermoplastic |
| Bearing Insert Type | Ball |
| Bearing Insert Material | Stainless Steel |
| Bore Diameter | 1 in |
| Series | Sentinel Series |
| Closure | Double Sealed |
| Center Height | 1-27/64 in |
| Mount Hole Center-to-Center Length | 4-1/8 in |
| Mount Hole Size | 0.433 in |
| Overall Length | 5-1/2 in |
| Overall Width | 2.68 in |
| Overall Height | 2.8 in |
| Finish | Unfinished |
| Includes | Closed End Cap, Open End Cap |
| Standards | IP69K |
| Temp. Range | 14 to 212 deg F |
| Bearing Lubrication | Maintenance-Free |
| Mounting Bolt Size | 3/8, M10 |
| Mount Type | Bolt-Through |
| Bore Type | Cylindrical |
| Number of Mount Holes | 2 |
| Bearing Material Grade | 440C |
| Resistance Properties | Corrosion-Resistant |
| Dynamic Radial Load Capacity | 2,675 lbf |
| Inner Ring Width | 1.342 in |
| Minimum Temperature | -4 deg F |
| Housing Material Grade | PBT |
| Maximum Temperature | 212 deg F |
| Lubricant Material | H-1 Food Grade Solid Lubricant |
| Static Radial Load Capacity | 1,416 lbf |
| Base Height | 0.57 in |
| Seal Material | Silicone |
| Maximum Speed | 5,100 rpm |
| Seal Type | Contact |
| Base Width | 1-1/2 in |
| Wire Rope Length | 5-1/2 in |
| Split Housing | Not Split |
| Internal Clearance | CN |
| Expansion Type | Fixed |
| Maximum PV | Not Applicable |
| Length | 5-1/2 in |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |