Jobber Length Drill Bit, Drill Bit Size 17/64 in, Drill Bit Point Angle 150 Degrees , Carbide, Bright (Uncoated), Decimal Equivalent 0.2656, Fractional Inch, Drill Bit Point Type Conventional Point, Non-Coolant Through
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 3-1/2 in |
| Drill Bit Point Angle | 150 deg |
| Drill Bit Size | 17/64 in |
| Number of Flutes | 3 |
| Shank Dia. | 17/64 in |
| Material - Machining | Carbide |
| Cutting Direction | Right Hand |
| Finish - Machining | Bright |
| Shank Type - Machining | Straight |
| Depth:Dia. Ratio | 5 xD |
| Decimal Equivalent | 0.2656 |
| Flute Length | 2-1/8 in |
| Drill Bit Grouping | Drill Bit |
| Drill Bit Dimension Type | Fractional Inch |
| List Number | 233 |
| Standards | Not Rated |
| Application | For Cast Iron, Low Carbon Steel : 1010, 1018 |
| Coolant Fed | Non-Coolant Through |
| Helix Angle | 30 deg |
| Shank Length | 34.9 mm |
| Flute Type | Spiral |
| Primary Material Application | Cast Iron, Steel |
| Measurement System | Fractional Inch |
| Primary Material Application ISO Code | P, K |
| Series | 233 |
| Drill Length Class | Jobber-Length |
| Maximum Drilling Depth | 54 mm |
| Drill Diameter Tolerance | +0.000 mm/-0.013 mm |
| Sheeter Drill | No |
| Drill Bit Point Type | Conventional Point |
| Spiral Direction | Right Hand |
| Material Grade - Machining | Micrograin |
| Helix Angle - Minimum | Not Applicable |
| Helix Angle - Maximum | 30 deg |
| Secondary Material Application ISO Code | P, K |
| Secondary Material Application | Cast Iron, Steel |
| Wire Rope Length | 3-1/2 in |
| Length | 3-1/2 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |