Straight Flute Drill Bit, Drill Bit Size 2 mm, 140 Degrees Drill Bit Point Angle, Material - Machining Carbide, Finish - Machining Bright (Uncoated), Decimal Equivalent 0.0787, Metric, 4 Facet Point Drill Bit Point Type, Flute Length 19 mm
| Item | Straight Flute Drill Bit |
|---|---|
| Overall Length | 44.45 mm |
| Drill Bit Size | 2 mm |
| Drill Bit Point Angle | 140 deg |
| Flute Length | 19 mm |
| Number of Flutes | 2 |
| Decimal Equivalent | 0.0787 |
| Drill Bit Material | Carbide |
| Drill Bit Finish | Bright |
| Material | Carbide |
| Shank Dia. | 2 mm |
| Drill Bit Grouping | Drill Bit |
| Point Type | Four Facet Point |
| Depth:Dia. Ratio | 5 xD |
| Drill Bit Dimension Type | Metric |
| Cutting Direction | Right Hand |
| List Number | 200 |
| Coolant Through | No |
| Depth x Dia. Ratio | 5 xD |
| Standards | Not Rated |
| Application | For Cast Iron, Low Carbon Steel : 1010, 1018 |
| Coolant Fed | Non-Coolant Through |
| Helix Angle | 0 Degrees |
| Shank Length | 25.4 mm |
| Primary Material Application | Cast Iron, Steel |
| Flute Type | Straight |
| Aircraft Drill | No |
| Series | 200 |
| Drill Bit Point Type | 4 Facet Point |
| Material - Machining | Carbide |
| Shank Type - Machining | Straight |
| Drill Diameter Tolerance | +0.000 mm/-0.013 mm |
| Measurement System | Metric |
| Finish - Machining | Bright |
| Primary Material Application ISO Code | K, P |
| Sheeter Drill | No |
| Drill Length Class | Jobber-Length |
| Maximum Drilling Depth | 19.1 mm |
| Secondary Material Application | Cast Iron, Steel |
| Material Grade - Machining | General Purpose |
| Secondary Material Application ISO Code | K, P |
| Spiral Direction | Neutral |
| Wire Rope Length | 44.45 mm |
| Length | 44.45 mm |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |